मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

P Consider the Quantity M K T P V of an Ideal Gas Where M is the Mass of the Gas. It Depends on the

Advertisements
Advertisements

प्रश्न

Consider the quantity \[\frac{MkT}{pV}\] of an ideal gas where M is the mass of the gas. It depends on the

पर्याय

  • temperature of the gas

  • volume of the gas

  • pressure of the gas

  • nature of the gas.

MCQ
Advertisements

उत्तर

nature of the gas.

\[\text { In  an  ideal  gas,   the  equation  of  state  is  given  by }\] \[PV = nRT\] \[ \Rightarrow PV = n N_A \frac{R}{N_A}T\] 

\[ \Rightarrow PV = n N_A kT\] 

\[ \Rightarrow \frac{1}{n N_A} = \frac{kT}{PV}\] 

\[\text { Multiplying  both  sides  by  mass  of  the  gas  M,   we  get }\] \[\frac{M}{n N_A} = \frac{MkT}{PV}\] \[\text { Now,   n N_A   gives  the  total  number  of  molecules  of  the  gas . }\] \[\text { Also },   \frac{M}{n N_A} \text{ gives  the  mass  of  a  single  molecule }. \] \[\text { Hence, }\frac{MkT}{PV} \text { is  the  mass  of  a  single  molecule  of  the  gas, }  \] \[\text { Molecular  mass  is  a  property  of  the  gas .}   \]

shaalaa.com
Interpretation of Temperature in Kinetic Theory - Introduction of Kinetic Theory of an Ideal Gas
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 24: Kinetic Theory of Gases - MCQ [पृष्ठ ३४]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
पाठ 24 Kinetic Theory of Gases
MCQ | Q 7 | पृष्ठ ३४

संबंधित प्रश्‍न

Keeping the number of moles, volume and temperature the same, which of the following are the same for all ideal gases?


The average momentum of a molecule in a sample of an ideal gas depends on


Calculate the volume of 1 mole of an ideal gas at STP.


Find the number of molecules in 1 cm3 of an ideal gas at 0°C and at a pressure of 10−5mm of mercury.

Use R = 8.31 J K-1 mol-1


A sample of 0.177 g of an ideal gas occupies 1000 cm3 at STP. Calculate the rms speed of the gas molecules.


Let Q and W denote the amount of heat given to an ideal gas and the work done by it in an isothermal process.


Let Q and W denote the amount of heat given to an ideal gas and the work done by it in an adiabatic process.
(a) Q = 0
(b) W = 0
(c) Q = W
(d) Q ≠ W


A vessel containing one mole of a monatomic ideal gas (molecular weight = 20 g mol−1) is moving on a floor at a speed of 50 m s−1. The vessel is stopped suddenly. Assuming that the mechanical energy lost has gone into the internal energy of the gas, find the rise in its temperature.


The figure shows a cylindrical container containing oxygen (γ = 1.4) and closed by a 50-kg frictionless piston. The area of cross-section is 100 cm2, atmospheric pressure is 100 kPa and g is 10 m s−2. The cylinder is slowly heated for some time. Find the amount of heat supplied to the gas if the piston moves out through a distance of 20 cm.


The volume of an ideal gas (γ = 1.5) is changed adiabatically from 4.00 litres to 3.00 litres. Find the ratio of (a) the final pressure to the initial pressure and (b) the final temperature to the initial temperature.


An ideal gas at pressure 2.5 × 105 Pa and temperature 300 K occupies 100 cc. It is adiabatically compressed to half its original volume. Calculate (a) the final pressure (b) the final temperature and (c) the work done by the gas in the process. Take γ = 1.5


1 litre of an ideal gas (γ = 1.5) at 300 K is suddenly compressed to half its original volume. (a) Find the ratio of the final pressure to the initial pressure. (b) If the original pressure is 100 kPa, find the work done by the gas in the process. (c) What is the change in internal energy? (d) What is the final temperature? (e) The gas is now cooled to 300 K keeping its pressure constant. Calculate the work done during the process. (f) The gas is now expanded isothermally to achieve its original volume of 1 litre. Calculate the work done by the gas. (g) Calculate the total work done in the cycle.


An ideal gas of density 1.7 × 10−3 g cm−3 at a pressure of 1.5 × 105 Pa is filled in a Kundt's tube. When the gas is resonated at a frequency of 3.0 kHz, nodes are formed at a separation of 6.0 cm. Calculate the molar heat capacities Cp and Cv of the gas.


ABCDEFGH is a hollow cube made of an insulator (Figure). Face ABCD has positive charge on it. Inside the cube, we have ionized hydrogen. The usual kinetic theory expression for pressure ______.

  1. will be valid.
  2. will not be valid since the ions would experience forces other than due to collisions with the walls.
  3. will not be valid since collisions with walls would not be elastic.
  4. will not be valid because isotropy is lost.

In a diatomic molecule, the rotational energy at a given temperature ______.

  1. obeys Maxwell’s distribution.
  2. have the same value for all molecules.
  3. equals the translational kinetic energy for each molecule.
  4. is (2/3)rd the translational kinetic energy for each molecule.

The container shown in figure has two chambers, separated by a partition, of volumes V1 = 2.0 litre and V2 = 3.0 litre. The chambers contain µ1 = 4.0 and µ2 = 5.0 moles of a gas at pressures p1 = 1.00 atm and p2 = 2.00 atm. Calculate the pressure after the partition is removed and the mixture attains equilibrium.

V1 V2
µ1, p1 µ2
  p2

Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×