Advertisements
Advertisements
प्रश्न
Mark the correct choice
- Assertion: Electric appliances with a metallic body have three wire connections.
- Reason: Three-pin connections reduce the heating of the connecting wires.
पर्याय
if both the assertion and the reason are true and the reason is the correct explanation of the assertion.
if both the assertion and the reason are true, but the reason is not the correct explanation of the assertion.
if the assertion is true, but the reason is false.
if the assertion is false, but the reason is true.
Advertisements
उत्तर
If the assertion is true, but the reason is false.
Correct Reason:
Three-pin connections to protect the electrical shock. Because appliances carry a high electric current.
APPEARS IN
संबंधित प्रश्न
An electric room heater draws a current of 2.4 A from the 120 V supply line. What current will this room heater draw when connected to 240 V supply line?
The current passing through an electric kettle has been doubled. The heat produced will become:
(a) half
(b) double
(c) four time
(d) one-fourth
Three heaters each rated 250 W, 100 V are connected in parallel to a 100 V supply. Calculate:
- the total current taken from the supply
- the resistance of each heater and
- the energy supplied in kWh to the three heaters in 5 hours.
Answer the following question:
what is the heating effect of the electric current? state any four applications of it?
Write two devices based on the heating effect of electric current.
Explain the application of heating effect of electric current in an electric bulb with a diagram.
True or False – If False give the correct answer
The fuse wire does not melts whenever there is overload in the wiring.
The following is not a safety device.
Two students decided to investigate the effect of water and air on iron object under identical experimental conditions. They measured the mass of each object before placing it partially immersed in 10 ml of water. After a few days, the object were removed, dried and their masses were measured. The table shows their results.
| Student | Object | Mass of Object before Rusting in g |
Mass of the coated object in g |
| A | Nail | 3.0 | 3.15 |
| B | Thin plate | 6.0 | 6.33 |
What might be the reason for the varied observations of the two students?
An electric kettle of 2 kW is used for 2h. Calculate the energy consumed in
- kilowatt hour and
- joules.
