Advertisements
Advertisements
प्रश्न
In reference to Freundlich adsorption isotherm, write the expression for adsorption of gases on solids in the form of an equation.
Advertisements
उत्तर
Freundlich adsorption isotherm for adsorption of gases on solids:
xm=Kp1nIt can also be written aslogxm=log K + 1nlog p">
\[\frac{x}{m} = K p^\frac{1}{n} \]
\[\text{It can also be written as}\]
\[\log\frac{x}{m} = \log K + \frac{1}{n}\log p\]
where x is the mass of the adsorbate, m is the mass of the absorbent and p is the pressure of the gas and n is a constant which is greater than 1.
APPEARS IN
संबंधित प्रश्न
Describe Freundlich adsorption isotherm.
How is activation of adsorbent achieved?
Adsorption of a gas follows Freundlich adsorption isotherm. x is the mass of the gas adsorbed on mass m of the adsorbent. The plot of log `"x"/"m"`· versus log P is shown in the given m graph. `"x"/"m"` is proportional to
Freundlich's equation for adsorption of gas on solid is represented as ____________.
Which of the following curves is in accordance with Freundlich adsorption isotherm?
Freundlich adsorption isotherm is given by the expression `x/m = kp^(1/n)` which of the following conclusions can be drawn from this expression.
(i) When `1/n` = 0, the adsorption is independent of pressure.
(ii) When `1/n` = 0, the adsorption is directly proportional to pressure.
(iii) When n = 0, `x/m` vs p graph is a line parallel to x-axis.
(iv) When n = 0, plot of `x/m` vs p is a curve.
In the freundilch adsorption isotherm, the value of x/m is 0.4 under a pressure of 0.2 at m calculate the value of the interact
Which of the following statement is INCORRECT regarding the adsorption of a gas on the surface of the solid?
The mass of gas adsorbed, x per unit mass of adsorbed, m was measured at various x pressures p. A graph between `log "x"/"m"` and log p gives a straight line with slope equal to 2 and the intercept equal to 0.4771. The value of `"x"/"m"` at a pressure of 4 atm is ______.
[Given log 3 = 0.4771]
For Freundlich adsorption isotherm, a plot of log (x/m) (Y-axis) and log p (x-axis) gives a straight line. The intercept and slope for the line is 0.4771 and 2, respectively. The mass of gas, adsorbed per gram of adsorbent if the initial pressure is 0.04 atm, is ______ × 10-4 g. (log 3 = 0.4771)
