Advertisements
Advertisements
प्रश्न
Explain why elemental semiconductor cannot be used to make visible LEDs.
Advertisements
उत्तर
Specially designed diodes, give out light radiations when forward biases. LEDs are made of GaAsp, Gap etc.
These are forward-biased P-N junctions which emit spontaneous radiation.
In element semiconductor, the band gap is such that the emission is in the infrared region and not in the visible region.
`λ = (hc)/E_g = (1242 eV nm)/E_g`
For Si; `E_g = 1.1 eV, λ = 1242/1.1` = 1129 nm
For Ge; `E_g = 0.7 eV, λ = 1242/0.7` = 1725 nm
APPEARS IN
संबंधित प्रश्न
In an n-type silicon, which of the following statement is true:
Answer the following question.
Three photodiodes D1, D2, and D3 are made of semiconductors having band gaps of 2.5 eV, 2 eV, and 3 eV respectively. Which of them will not be able to detect light of wavelength 600 nm?
In the case of metals, the valence and conduction bands ______.
In the case of semiconductors, the valence and conduction bands ______.
Doping of semiconductor is the process of ______.
The energy band gap is maximum in
The electrons in the conduction band of a semiconductor are
ASSERTION (A): The electrical conductivity of a semiconductor increases on doping.
REASON (R): Doping always increases the number of electrons in the semiconductor.
The energy band gap of semiconducting material to produce violet (wavelength = 4000 Å).
LED is ______ eV. (Round off to the nearest integer)
When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is ______.
Draw an energy band diagram for a p-type semiconductor at T > 0 K.
Draw an energy band diagram for an n-type semiconductor at T > 0 K.
