Advertisements
Advertisements
प्रश्न
Calculate the resistance of an electric bulb which allows a 10 A current when connected to a 220 V power source.
Advertisements
उत्तर
Current flowing through the electric bulb, I = 10 A
Voltage of the source in the circuit, V = 220 V
According to Ohm’s law,
V=IR
Where, R is the resistance of the electric bulb
`R=V/I=220/10=22`Ω
Therefore, the resistance of the electric bulb is 22 Ω.
APPEARS IN
संबंधित प्रश्न
An electric heater of resistance 8 Ω takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater.
Name the physical quality which is measured in
(i) Kw (ii) kWh
An electric bulb is rated ‘100 W, 250 V’. What information does this convey?
A bulb with rating 250 V, 100 W is connected to a power supply of 220 V situated 10 m away using a copper wire of area of cross-section 5 mm2. How much power will be consumed by the connecting wires? Resistivity of copper = 1.7 × 10−8 Ωm
What changes in energy occur in an electric heater?
An electric iron is rated at 230 V, 750 W. What is its resistance? What maximum current can be passed through it?
A family uses 8 kW of power. Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?
An overhead tank of capacity 10 k litre is kept at the top of building 15 m high. Water falls in tank with speed 5`sqrt2` m/s. Water level is at a depth 5 m below ground. The tank is to be filled in `1/2` hr. If efficiency of pump is 67.5% electric power used is ______ W.
