Advertisements
Advertisements
प्रश्न
An electric bulb is connected to a 220 V power supply line. If the bulb draws a current of 0.5 A, calculate the power of the bulb.
Advertisements
उत्तर
Here, V = 220 V and I = 0.5 A
(given)
Power drawn by the device is given by:
P = VI
Therefore:
P = 220 x 0.5
= 110 W
APPEARS IN
संबंधित प्रश्न
An electric motor takes 5 A from a 220 V line. Determine the power of the motor and the energy consumed in 2 h.
Which one has a higher electrical resistance : a 100 watt bulb or a 60 watt bulb?
Which quantity has the unit of watt?
An electric motor takes 5 amperes current form a 220 volt supply line. Calculate the power of the motor and electric energy consumed by it in 2 hours.
When an electric lamp is connected to 12 V battery, it draws a current of 0.5 A. The power of the lamp is:
(a) 0.5 W
(b) 6 W
(c) 12 W
(d) 24 W
When a current of 4.0 A passes through a certain resistor for 10 minutes, 2.88 × 104 J of heat are produced. Calculate
the power of the resistor.
the voltage across the resistor.
Which of the following is the most likely temperature of the filament of an electric light bulb when it is working on the normal 220 V supply line?
(a) 500°C
(b) 1500°C
(c) 2500°C
(d) 4500°C
Water in an electric kettle connected to a 220 V supply took 5 minutes to reach its boiling point. How long would it have taken if the supply voltage had fallen to 200 V?
A bulb with rating 250 V, 100 W is connected to a power supply of 220 V situated 10 m away using a copper wire of area of cross-section 5 mm2. How much power will be consumed by the connecting wires? Resistivity of copper = 1.7 × 10−8 Ωm
Which cable, one rated 15A and the other rated 5A will be thicker? Give a reason.
Mention three uses of the carbon arc.
Why is a concave reflector placed behind the heating element in a room heater.
Household wiring for lamp connections can either be done in parallel or in series.Which one would you prefer? Give a reason for your answer.
How does the heat produced by die passage of current in a metallic wire depend on the current in the wire?
Three 250 W heaters are connected in parallel to a 100 V supply, Calculate the resistance of each heater.
An electric bulb is rated as 100W – 250V. What information does it convey? Calculate the resistance of its filament while glowing.
A battery of e.m.f. 12V and internal resistance 1.6 Ω is connected to two resistors of 4Ω and 6Ω connected in parallel. Calculate:
(i) the current drawn from the battery,
(ii) the power dissipated in each resistor,
(ii)the total power supplied by the battery.
A. bulb is rated at 100W, 250V and another one at 60W, 250V. What is the current flowing in the circuit if the two bulbs are put in series across a 220 V mains supply?
The resistance of filament of an electric heater is 500 Ω It is operated at 200V for 1 hour daily. Calculate the current drawn by the heater and the energy consumed in kWh, by the heater in a month of 30 days.
A electric bulb is rate 220 V, 60 W. its electric cell resistance is nearly
