Advertisements
Advertisements
प्रश्न
A wheel with 8 metallic spokes each 50 cm long is rotated with a speed of 120 rev/min in a plane normal to the horizontal component of the Earth’s magnetic field. The Earth’s magnetic field at the place is 0.4 G and the angle of dip is 60°. Calculate the emf induced between the axle and the rim of the wheel. How will the value of emf be affected if the number of spokes were increased?
Advertisements
उत्तर
`because H = B cos I = 0.4cos60° = 0.2 G = 0.2 xx 10^-4 T`
This component is parallel to the plane of the wheel. Thus, the emf induced is given as,
`E =1/2 Bl^2ω,\text { where } ω = (2piN)/t`
`therefore E= 1/2 xx 0.2 xx 10^-4 xx 0.5^2 xx (2xx 3.14 xx 120)/60 = 3.14 xx 10^-5 V`
The value of emf induced is independent of the number of spokes as the emf’s across the spokes are in parallel. So, the emf will be unaffected with the increase in spokes.
संबंधित प्रश्न
Calculate force per unit length acting on the wire B due to the current flowing in the wire A.(See
Figure 2 below)
Answer the following question.
Two bulbs are rated (P1, V) and (P2, V). If they are connected (i) in series and (ii) in parallel across a supply V, find the power dissipated in the two combinations in terms of P1 and P2.
100 cells each of emf 5 V and internal resistance 1 Ω are to be arranged so as to produce maximum current in a 25 Ω resistance. Each row contains equal number of cells. The number of rows should be ______.
Give reason/short answer.
In the given circuit diagram two resistors are connected to a 5V supply.
A third resistor is now connected in parallel with 6Ω resistor. Will the potential difference across the 8Ω resistor the larger, smaller, or the same as before? Explain the reason for your answer.
Two cells of 1.25 V and 0.75 V are connected in series with anode of one connected to anode of the other. The effective voltage will be ______.
When cells are connected in parallel, then ______
Two cells of emfs E1 and E2 and internal resistances r1 and r2 respectively are connected in parallel as shown in the figure. Deduce the expression for the
- equivalent emf of the combination
- equivalent internal resistance of the combination
- potential difference between the points A and B.
Five identical cells each of internal resistance 1Ω and emf 5V are connected in series and in parallel with an external resistance 'R'. For what value of 'R', current in series and parallel combination will remain the same?
Two cells of emf E1 and E2 and internal resistances r1 and r2 are connected in parallel, with their terminals of the same polarity connected together. Obtain an expression for the equivalent emf of the combination.
A 60 Ω resistor, a 1.0 H inductor and a 4 μF capacitor are connected in series to an ac supply generating an emf e = 300 sin (500t) V. Calculate:
- impedance of the circuit.
- peak value of the current flowing through the circuit.
- phase difference between the current and the supply voltage.
