Advertisements
Advertisements
प्रश्न
A tent is in the shape of a cylinder surmounted by a conical top. If the height and radius of the cylindrical part are 3 m and 14 m respectively, and the total height of the tent is 13.5 m, find the area of the canvas required for making the tent, keeping a provision of 26 m2 of canvas for stitching and wastage. Also, find the cost of the canvas to be purchased at the rate of ₹ 500 per m2.
Advertisements
उत्तर
Radius of the cylindrical tent (r) = 14 m
Total height of the tent = 13.5 m
Height of the cylinder = 3 m
Height of the conical part = 10.5 m
Slant height of the cone (l) = `sqrt(h^2 + r^2)`
= `sqrt((10.5)^2 + (14)^2`
= `sqrt(110.25 + 196)`
= `sqrt(306.25)`
= 17.5 m
Curved surface area of cylindrical portion
= 2πrh
= `2 xx 22/7 xx 14 xx 3`
= 264 m2
Curved surface area of conical portion
= πrl
= `22/7 xx 14 xx 17.5`
= 770 m2
Total curved surface area = 264 m2 + 770 m2 = 1034 m2
Provision for stitching and wastage = 26 m2
Area of canvas to be purchased = 1060 m2
Cost of canvas = Rate × Surface area
= 500 × 1060
= ₹ 5,30,000/-
APPEARS IN
संबंधित प्रश्न
Prove that the surface area of a sphere is equal to the curved surface area of the circumference cylinder__?
If the radii of circular ends of a bucket 24cm high are 5cm and 15cm. find surface area of
bucket?
Radii of circular ends of a solid frustum off a cone re 33cm and 27cm and its slant height are 10cm. find its total surface area?
A milk container is made of metal sheet in the shape of frustum of a cone whose volume is 10459 `3/7` cm3. The radii of its lower and upper circular ends are 8cm and 20cm. find the cost of metal sheet used in making container at rate of Rs 1.4 per cm2?
A cylindrical bucket 28 cm in diameter and 72 cm high is full of water. The water is emptied into a rectangular tank 66 cm long and 28 cm wide. Find the height of the water level in the tank.
If r1 and r2 be the radii of two solid metallic spheres and if they are melted into one solid sphere, prove that the radius of the new sphere is \[\left( r_1^3 + r_2^3 \right)^\frac{1}{3}\].
Match the following columns:
| Column I | Column II |
| (a) The radii of the circular ends of a bucket, in the form of the frustum of a cone of height 30 cm, are 20 cm and 10 cm respectively. The capacity of the bucket is ........cm3. |
(p) 2418π |
| (b) The radii of the circular ends of a conical bucket of height 15 cm are 20 and 12 cm respectively. The slant height of the bucket is ........ cm. |
(q) 22000 |
| (c) The radii of the circular ends of a solid frustum of a cone are 33 cm and 27 cm and its slant height is 10 cm. The total surface area of the bucket is .........cm2. |
(r) 12 |
| (d) Three solid metallic spheres of radii 3 cm, 4 cm and 5 cm are melted to form a single solid sphere. The diameter of the resulting sphere is ........ cm. |
(s) 17 |
Two cubes each of volume 8 cm³ are joined end to end, then the surface area of the resulting cuboid is ______.
Two identical solid hemispheres of equal base radius r cm are stuck together along their bases. The total surface area of the combination is 6πr2.
The boilers are used in thermal power plants to store water and then used to produce steam. One such boiler consists of a cylindrical part in middle and two hemispherical parts at its both ends.
Length of the cylindrical part is 7 m and radius of cylindrical part is `7/2` m.
Find the total surface area and the volume of the boiler. Also, find the ratio of the volume of cylindrical part to the volume of one hemispherical part.
