मराठी

A cell of e.m.f. 1.8V and internal resistance 2Ω is connected in series with an ammeter of resistance 0.7Ω and a resistor of 4.5Ω as shown in Fig. What would be the reading of the ammeter?

Advertisements
Advertisements

प्रश्न

A cell of e.m.f. 1.8V and internal resistance 2Ω is connected in series with an ammeter of resistance 0.7Ω and a resistor of 4.5Ω as shown in Fig. 

  1. What would be the reading of the ammeter?
  2. What is the potential difference across the terminals of the cell? 
संख्यात्मक
Advertisements

उत्तर

The resistances are series connected

∴ Total resistance of circuit = (r + R)

(r + R) = (2 + 0.7 + 4.5)

= 7.2 Ω

e.m.f. of cell = 1.8 V

  1.  Reading of Ammeter `I = "V"/("R" + r)`
    = `("e.m.f")/("R" + r)`
    `I = 1.8/7.2`
    = 0.25 A
  2. Potential difference across the terminals of the cell = IR
    `"V" = 1/4 xx 5.2`
    V = 1.3 V
    R = 4.5 + 0.7
    R = 5.2 Ω
shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 8: Current Electricity - EXERCISE - 8(B) [पृष्ठ २०१]

APPEARS IN

सेलिना Physics [English] Class 10 ICSE
पाठ 8 Current Electricity
EXERCISE - 8(B) | Q 3. | पृष्ठ २०१

संबंधित प्रश्‍न

Name two factors on which the internal resistance of a cell depends and state how does it depend on the factors stated by you.


A cell of e.m.f ε and internal resistance r is used to send current to an external resistance R. Write expressions for

  1. the total resistance of circuit.
  2. the current drawn from the cell.
  3. the p.d. across the cell.
  4. voltage drop inside the cell. 

Explain why the p.d across the terminals of a cell is more in an open circuit and reduced in a closed circuit. 


A cell of e.m.f. ε and internal resistance 𝔯 sends current 1.0 A when it is connected to an external resistance 1.9 Ω. But it sends current 0.5 A when it is connected to an external resistance 3.9 Ω. Calculate the values of ε and 𝔯.


Four cells, each of e.m.f. 1.5 V and internal resistance 2.0 ohms are connected in parallel. The battery of cells is connected to an external resistance of 2.5 ohms. Calculate:

(i) The total resistance of the circuit.
(ii) The current flowing in the external circuit.
(iii) The drop in potential across-the terminals of the cells.


A battery of 4 cell, each of e.m.f. 1.5 volt and internal resistance 0.5 Ω is connected to three resistances as shown in the figure. Calculate:
(i) The total resistance of the circuit.
(ii) The current through the cell.
(iii) The current through each resistance.
(iv) The p.d. across each resistance.


A cell supplies a current of 0.6 A through a 2Ω coil and a current of 0.3 A through on 8Ω coil. Calculate the e.m.f and internal resistance of the cell.


When a resistance of 3Ω is connected across a cell, the current flowing is 0.5 A. On changing the resistance to 7Ω, the current becomes 0.25A. Calculate the e.m.f. and the internal resistance of the cell.


(a) Calculate the total resistance across AB.

(b) If a cell of e.m.f 2.4 V with negligible internal resistance is connected across AB then calculate the current drawn from the cell.


The diagram in Figure shows a cell of e.m.f. ε = 4 volt and internal resistance r = 2 ohm connected to an external resistance R = 8 ohm. The ammeter A measures the current in the circuit and the voltmeter V measures the terminal voltage across the cell. What will be the readings of the ammeter and voltmeter when

  1. the key K is open, and
  2. the key K is closed


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×