Science (English Medium) कक्षा १२ - CBSE Question Bank Solutions for Physics

Electrons are emitted by a hot filament and are accelerated by an electric field, as shown in the figure. The two stops at the left ensure that the electron beam has a uniform cross-section.

A current of 1.0 A exists in a copper wire of cross-section 1.0 mm². Assuming one free electron per atom, calculate the drift speed of the free electrons in the wire. The density of copper is 9000 kg m^–3.

Consider a wire of length 4 m and cross-sectional area 1 mm² carrying a  current of 2 A. If each cubic metre of the material contains 10²⁹ free electrons, find the average time taken by an electron to cross the length of the wire.

Consider the following statements.
(A) Free-electron density is different in different metals.
(B) Free-electron density in a metal depends on temperature.
Seebeck Effect is caused _____________ .

Consider the following statements.
(A) Free-electron density is different in different metals.
(B) Free-electron density in a metal depends on temperature.

Peltier Effect is caused _______________ .

Consider the following statements.
(A) Free-electron density is different in different metals.
(B) Free-electron density in a metal depends on temperature.

Thomson Effect is caused _______________ .

Consider the situation shown in figure (31-E29). The width of each plate is b. The capacitor plates are rigidly clamped in the laboratory and connected to a battery of emf ε. All surfaces are frictionless. Calculate the value of M for which the dielectric slab will stay in equilibrium.

When an AC source is connected to a capacitor, there is a steady-state current in the circuit. Does it mean that the charges jump from one plate to the other to complete the circuit?

A current i₁ = i₀ sin ωt passes through a resistor of resistance R. How much thermal energy is produced in one time period? A current i₂ = −i₀ sin ωt passes through the resistor. How much thermal energy is produced in one time period? If i₁ and i₂ both pass through the resistor simultaneously, how much thermal energy is produced? Is the principle of superposition obeyed in this case?

Is energy produced when a transformer steps up the voltage?

A transformer is designed to convert an AC voltage of 220 V to an AC voltage of 12 V. If the input terminals are connected to a DC voltage of 220 V, the transformer usually burns. Explain.

A capacitor acts as an infinite resistance for ______.

An AC source producing emf ε = ε₀ [cos (100 π s⁻¹)t + cos (500 π s⁻¹)t] is connected in series with a capacitor and a resistor. The steady-state current in the circuit is found to be i = i₁ cos [(100 π s⁻¹)t + φ₁) + i₂ cos [(500π s⁻¹)t + ϕ₂]. So,

The peak voltage of a 220 V AC source is

An AC source is rated 220 V, 50 Hz. The average voltage is calculated in a time interval of 0.01 s. It

The AC voltage across a resistance can be measured using

A bulb rated 60 W at 220 V is connected across a household supply of alternating voltage of 220 V. Calculate the maximum instantaneous current through the filament.

The dielectric strength of air is 3.0 × 10⁶ V/m. A parallel-plate air-capacitor has area 20 cm² and plate separation 0.10 mm. Find the maximum rms voltage of an AC source that can be safely connected to this capacitor.

The photocurrent in an experiment on photoelectric effect increases if ______.

A transformer has 50 turns in the primary and 100 in the secondary. If the primary is connected to a 220 V DC supply, what will be the voltage across the secondary?