Advertisements
Advertisements
प्रश्न
Write the truth table for the circuit shown in figure. Name the gate that the circuit resembles.
Advertisements
उत्तर
This is ‘AND’ Gate and its characteristics are as follows:
(1) It has two inputs (A and B) and only one output (Y).
(2) Boolean expression us Y = A·B is read as "Y equals A AND B".
(3) Realization of AND gate
Logical symbol of AND gate
(i) A = 0, 8 = 0
The voltage supply through R is forward biasing diodes D1 and D2 (offers low resistance), the voltage V would drop across R. The output voltage at Y = the voltage across diode = 0
(ii) A = 0, B = 1
D1 = Conducts, D2 = Not Conducts
The out voltage at Y = The voltage across the diode (D1) = 0
(iii) A = 1, B = 0
D1 = Conducts, D2 = Not conducts
The out voltage at Y = The voltage across the diode (D2) = 0
(iv) A = 1, B = 1
None of the diode conducts
The out voltage at Y = Battery voltage = 1
(4) Truth table for ‘AND’ gate
| A | B | V0 = A · B |
| 0 | 0 | 0 |
| 0 | 1 | 0 |
| 1 | 0 | 0 |
| 1 | 1 | 1 |
APPEARS IN
संबंधित प्रश्न
The following figure shows the input waveforms (A, B) and the output waveform (Y) of a gate. Identify the gate, write its truth table and draw its logic symbol.
Write the truth table for the combination of the gates shown. Name the gates used.
Identify the logic gates marked 'P' and 'Q' in the given circuit. Write the truth table for the combination.
You are given a circuit below. Write its truth table. Hence, identify the logic operation carried out by this circuit. Draw the logic symbol of the gate it corresponds to.
Identify the logic gate represented by the circuit as shown and write its truth table.
What will be the values of input A and B for the Boolean expression `overline ((A +B) .(A*B)) =1?`
The output of an OR gate is connected to both the inputs of a NAND gate Draw the logic circuit of this combinaion of getes and write its truth table.
An AND gate can be prepared by repetitive use of
(a) NOT gate
(b) OR gate
(c) NAND gate
(d) NOR gate.
The amplification factor of a triode operating in the linear region depends strongly on ____________ .
You are given a circuit as shown in the figure, which consists of the NAND gate. Identify the logic operation carried out by the two. Write the truth table. Identify the gates equivalent to the tow circuit.
The current obtained from a simple filterless rectifier is
The output of 2-input or gate is zero only when its
In potential barrier development in a junction diode opposes
The truth table for the following logic circuit is:
Truth table for the given circuit (Figure) is ______.
Two car garages have a common gate which needs to open automatically when a car enters either of the garages or cars enter both. Devise a circuit that resembles this situation using diodes for this situation.
Draw the output signals C1 and C2 in the given combination of gates (Figure).
An X-OR gate has following truth table:
| A | B | Y |
| 0 | 0 | 0 |
| 0 | 1 | 1 |
| 1 | 0 | 1 |
| 1 | 1 | 0 |
It is represented by following logic relation `Y = barA.B + A.barB`. Build this gate using AND, OR and NOT gates.
