Advertisements
Advertisements
प्रश्न
Water is pouring into a cubiodal reservoir at the rate of 60 litres per minute. If the volume of the reservoir is 108 m3, find the number of hours it will take to fill the reservoir.
Advertisements
उत्तर
Volume of cuboidal reservoir = 108 m3 = (108 × 1000) L = 108000 L
Rate of pouring water = 60 L/minute
∴ Time to fill the reservoir
= `"Volume of reservoir"/ "Rate of pouring water"`
= `(108 xx 10^3)/60`
= 1.8 × 103 min.
= 1800 min.
= 30 hrs.
APPEARS IN
संबंधित प्रश्न
A small indoor greenhouse (herbarium) is made entirely of glass panes (including base) held together with tape. It is 30 cm long, 25 cm wide and 25 cm high. How much of tape is needed for all the 12 edges?
How much clay is dug out in digging a well measuring 3 m by 2 m by 5 m?
Show that the product of the areas of the floor and two adjacent walls of a cuboid is the square of its volume.
The dimensions of a room are 12.5 m by 9 m by 7 m. There are 2 doors and 4 windows in the room; each door measures 2.5 m by 1.2 m and each window 1.5 m by 1 m. Find the cost of painting the walls at Rs 3.50 per square metre.
The area of the floor of a room is 15 m2. If its height is 4 m, then the volume of the air contained in the room is
75 persons can sleep in a room 25 m by 9.6 m. If each person requires 16 m3 of the air; find the height of the room.
A room 5 m long, 4.5 m wide, and 3.6 m high have one door 1.5 m by 2.4 m and two windows, each 1 m by 0.75 m. Find :
(i) the area of its walls, excluding door and windows ;
(ii) the cost of distempering its walls at the rate of Rs.4.50 per m2.
(iii) the cost of painting its roof at the rate of Rs.9 per m2.
A closed box measures 66 cm, 36 cm and 21 cm from outside. If its walls are made of metal-sheet, 0.5 cm thick; find :
(i) the capacity of the box ;
(ii) the volume of metal-sheet and
(iii) weight of the box, if 1 cm3 of metal weighs 3.6 gm.
Find the area of metal-sheet required to make an open tank of length = 10 m, breadth = 7.5 m and depth = 3.8 m.
The ratio between the curved surface area and the total surface area of a cylinder is 1: 2. Find the ratio between the height and the radius of the cylinder.
