Advertisements
Advertisements
प्रश्न
The paint in a certain container is sufficient to paint an area equal to 9.375 m2. How many bricks of dimensions 22.5 cm × 10 cm × 7.5 cm can be painted out of this container?
Advertisements
उत्तर
Total surface area of one brick = 2(lb + bh + lh)
= [2(22.5 ×10 + 10 × 7.5 + 22.5 × 7.5)] cm2
= 2(225 + 75 + 168.75) cm2
= (2 × 468.75) cm2
= 937.5 cm2
Let n bricks can be painted out by the paint of the container.
Area of n bricks = (n ×937.5) cm2 = 937.5n cm2
Area that can be painted by the paint of the container = 9.375 m2 = 93750 cm2
∴ 93750 = 937.5n
n = 100
Therefore, 100 bricks can be painted out by the paint of the container.
APPEARS IN
संबंधित प्रश्न
The floor of a rectangular hall has a perimeter 250 m. If the cost of panting the four walls at the rate of Rs.10 per m2 is Rs.15000, find the height of the hall.
[Hint: Area of the four walls = Lateral surface area.]
Find the length of the longest rod that can be placed in a room 12 m long, 9 m broad and 8 m high.
The areas of three adjacent faces of a cuboid are x, y and z. If the volume is V, prove that V2 = xyz.
Three cubes of metal whose edges are in the ratio 3 : 4 : 5 are melted down in to a single cube whose diagonal is 12 `sqrt(3)` cm. Find the edges of three cubes.
If the areas of the adjacent faces of a rectangular block are in the ratio 2 : 3 : 4 and its volume is 9000 cm3, then the length of the shortest edge is
Three equal cubes are placed adjacently in a row. The ratio of the total surface area of the resulting cuboid to that of the sum of the surface areas of three cubes, is
A cube of edge 6 cm and a cuboid with dimensions 4 cm x x cm x 15 cm are equal in volume. Find:
(i) the value of x.
(ii) the total surface area of the cuboid.
(iii) the total surface area of the cube.
(iv) which of these two has a greater surface and by how much?
How much sheet metal is required to make a closed rectangular box of length 1.5 m, breadth 1.2 m, and height 1.3 m?
Find the Total Surface Area and the Lateral Surface Area of a cuboid whose dimensions are: length = 20 cm, breadth = 15 cm, height = 8 cm
Below are the drawings of cross sections of two different pipes used to fill swimming pools. Figure A is a combination of 2 pipes each having a radius of 8 cm. Figure B is a pipe having a radius of 15 cm. If the force of the flow of water coming out of the pipes is the same in both the cases, which will fill the swimming pool faster?
