हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान कक्षा ११

The Initial Pressure and Volume of a Given Mass of a Gas (Cp/Cv = γ) Are P0 and V0. the Gas Can Exchange Heat with the Surrounding.

Advertisements
Advertisements

प्रश्न

The initial pressure and volume of a given mass of a gas (Cp/Cv = γ) are p0 and V0. The gas can exchange heat with the surrounding. (a) It is slowly compressed to a volume V0/2 and then suddenly compressed to V0/4. Find the final pressure. (b) If the gas is suddenly compressed from the volume V0 to V0/2 and then slowly compressed to V0/4, what will be the final pressure?

संक्षेप में उत्तर
Advertisements

उत्तर

Given:
For the gas, `("C"_"p")/"C"_"v" = gamma`

Initial pressure of the gas = P0 
Initial volume of the gas = V0
(a)
(i) As the gas is slowly compressed, its temperature will remain constant.
For isothermal compression,

P1V1 = P2V2

So, P0V0 =P2 `"V"_0/2 =>"P"_2 = 2"P"_0`

(ii) Sudden compression means that the gas could not get sufficient time to exchange heat with its surroundings. So, it is an adiabatiac compression.
So, for adiabatic compression,
P1V1γ = P2V2γ  Or 

`2"P"_0 ("V"_0/2)^gamma = "P"_2 ("V"_0/4)^ gamma`

`=> "P"_2 = "V"_0^gamma/2^ gamma xx 2"P"_0 xx 4^gamma/"V"_0^gamma`

= 2γ × 2P0 = P02γ+1  
(b)
(i) Adiabatic compression:
P1V1γ = P2V2γ

`"P"_0"V"_0 ^ gamma = "P'"("V"_0/2)^ gamma`

⇒ P' = P02γ
(ii) Isothermal compression:
P1V1 = P2V2

`2 ^ gamma "P"_0 xx "V"_0/2 = "P''" ("V_0/2)`

P" = P02γ × 2
⇒ P" = P02γ+1

shaalaa.com
Kinetic Theory of Gases - Concept of Pressure
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 27: Specific Heat Capacities of Gases - Exercises [पृष्ठ ७८]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
अध्याय 27 Specific Heat Capacities of Gases
Exercises | Q 20 | पृष्ठ ७८

संबंधित प्रश्न

While gas from a cooking gas cylinder is used, the pressure does not fall appreciably till the last few minutes. Why?


A gas behaves more closely as an ideal gas at


Figure shows a cylindrical tube with adiabatic walls and fitted with a diathermic separator. The separator can be slid in the tube by an external mechanism. An ideal gas is injected into the two sides at equal pressures and equal temperatures. The separator remains in equilibrium at the middle. It is now slid to a position where it divides the tube in the ratio of 1:3. Find the ratio of the pressures in the two parts of the vessel.

Use R=8.314J K-1 mol-1


A vessel contains 1.60 g of oxygen and 2.80 g of nitrogen. The temperature is maintained at 300 K and the volume of the vessel is 0.166 m3. Find the pressure of the mixture.

Use R = 8.3 J K-1 mol-1


Is a slow process always isothermal? Is a quick process always adiabatic?


In an adiabatic process on a gas with γ = 1.4, the pressure is increased by 0.5%. The volume decreases by about


An ideal gas is kept in a long cylindrical vessel fitted with a frictionless piston of cross-sectional area 10 cm2 and weight 1 kg. The length of the gas column in the vessel is 20 cm. The atmospheric pressure is 100 kPa. The vessel is now taken into a spaceship revolving round the earth as a satellite. The air pressure in the spaceship is maintained at 100 kPa. Find the length of the gas column in the cylinder.

Use R = 8.3 J K-1 mol-1


The human body has an average temperature of 98°F. Assume that the vapour pressure of the blood in the veins behaves like that of pure water. Find the minimum atmospheric pressure which is necessary to prevent the blood from boiling. Use figure for the vapour pressures.


A faulty barometer contains certain amount of air and saturated water vapour. It reads 74.0 cm when the atmospheric pressure is 76.0 cm of mercury and reads 72.10 cm when the atmospheric pressure is 74.0 cm of mercury. Saturation vapour pressure at the air temperature = 1.0 cm of mercury. Find the length of the barometer tube above the mercury level in the reservoir.


On a winter day, the outside temperature is 0°C and relative humidity 40%. The air from outside comes into a room and is heated to 20°C. What is the relative humidity in the room? The saturation vapour pressure at 0°C is 4.6 mm of mercury and at 20°C it is 18 mm of mercury.


The temperature and humidity of air are 27°C and 50% on a particular day. Calculate the amount of vapour that should be added to 1 cubic metre of air to saturate it. The saturation vapour pressure at 27°C = 3600 Pa.

Use R = 8.3 J K-1 mol-1


A bucket full of water is placed in a room at 15°C with initial relative humidity 40%. The volume of the room is 50 m3. (a) How much water will evaporate? (b) If the room temperature is increased by 5°C, how much more water will evaporate? The saturation vapour pressure of water at 15°C and 20°C are 1.6 kPa and 2.4 kPa respectively.

Use R = 8.3 J K-1 mol-1


A cuboidal container having dimensions 2 m × 1.5 m × 0.5 m holds a mixture of 12 g of He, 36 g of Ar, and 20 g of Ne, If the container is maintained at 300 K, Find the pressure exerted by the mixture (given MHe = 4, MAr = 40, MNe = 20). 


In a cubical box of volume V, there are N molecules of a gas moving randomly. If m is mass of each molecule and v2 is the mean square of x component of the velocity of molecules, then the pressure of the gas is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×