हिंदी

The Current Flowing Through an Inductor of Self Inductance L is Continuously Increasing. Plot a Graph Showing the Variation of Magnetic Flux Versus the Current

Advertisements
Advertisements

प्रश्न

The current flowing through an inductor of self inductance L is continuously increasing. Plot a graph showing the variation of

Magnetic flux versus the current

Advertisements

उत्तर

Since ϕ = L I

where,   I = Strength of current through the coil at any time 
             ϕ =  Amount of magnetic flux linked with all turns of the coil at that time 
     and, L = Constant of proportionality called coefficient of self induction

 

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2013-2014 (March) Delhi Set 1

वीडियो ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्न

A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 20 A in 0.5 s, what is the change of flux linkage with the other coil?


An inductor is connected to a battery through a switch. Explain why the emf induced in the inductor is much larger when the switch is opened as compared to the emf induced when the switch is closed.


Figure shows a horizontal solenoid connected to a battery and a switch. A copper ring is placed on a frictionless track, the axis of the ring being along the axis of the solenoid. As the switch is closed, the ring will __________ .


Find magnetic flux density at a point on the axis of a long solenoid having 5000 tums/m when it carrying a current of 2 A.


Two coils, A and B, are lined such that emf ε is induced in B when the current in A is changing at the rate I. If current i is now made to flow in B, the flux linked with A will be ______.

The magnetic flux linked with a coil of N turns of area of cross-section A held with its plane parallel to the field B is ______.


Consider a closed loop C in a magnetic field (Figure). The flux passing through the loop is defined by choosing a surface whose edge coincides with the loop and using the formula φ = B1.dA1 + B2.dA2 +... Now if we chose two different surfaces S1 and S2 having C as their edge, would we get the same answer for flux. Jusity your answer.


What is \[\theta\] in \[\Phi_B=BA\cos\theta\]?


Which equivalent unit of magnetic flux uses volt and second?


What happens to magnetic flux when magnetic field \[B\] increases while area and orientation remain unchanged?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×