Advertisements
Advertisements
प्रश्न
Name and state the principle on which a hydraulic press works. Write one use of hydraulic press.
Advertisements
उत्तर
Hydraulic press works on principle of hydraulic machine.
It states that a small force applied on a smaller piston is transmitted to produce a large force on the bigger piston.
Use: It is used for squeezing oil out of linseed and cotton seeds.
संबंधित प्रश्न
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
The areas of pistons in a hydraulic machine are 5 cm2 and 625 cm2. What force on the smaller piston will support a load of 1250 N on the larger piston? State any assumption which you make in your calculation.
66640 Pa pressure is exerted by 0.50 m vertical column of a liquid. If g = 9.8 Nkg−1, calculate the density of the liquid.
Select the correct option.
A dam for water reservoir is built thicker at the bottom than at the top because
Select the correct option.
Pressure at a point inside a liquid does not depend on
Define the SI unit of pressure.
How does the liquid pressure on a diver change according to the following condition:
When the driver moves to the greater depth?
A hydraulic press can lift 100 kg when a mass 'm' is placed on the smaller piston. It can lift ______ kg when the diameter of the larger piston is increased by 4 times and that of the smaller piston is decreased by 4 times keeping the same mass 'm' on the smaller piston.
