Advertisements
Advertisements
प्रश्न
In 10 s, charge of 25 C leaves a battery, and 200 J of energy are delivered to an outside circuit a result.
What is the p.d. across the battery?
Advertisements
उत्तर
Given:
Time, t = 10 s
Charge, Q = 25 C
Energy delivered = Work done, W = 200 J
Using the relation, V = W/Q
V = 200/25 = 8 V
So the p.d. across the battery is 8 volts.
APPEARS IN
संबंधित प्रश्न
Draw the electrical symbols of the following components and state its use:
Ammeter.
Three 2 V cells are connected in series and used as a battery in a circuit.
What is the p.d. at the terminals of the battery?
Why should the resistance of:
an ammeter be very small?
Which instrument is used to measure electric current? How should it be connected in a circuit?
An electric circuit consisting of a 0.5 m long nichrome wire XY, an ammeter, a voltmeter, four cells of 1.5 V each and a plug key was set up.
(i) Draw a diagram of this electric circuit to study the relation between the potential difference maintained between the points 'X' and 'Y' and the electric current flowing through XY.
Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line.
(d) Which circuit would have less current in it?
What is international convention of colour coding in a cable?
Tick(✓) the correct choice in the following:
The outer casing of an electric iron is generally connected to earth in order
to
If a fuse contains a 5 A fuse wire and the voltage is 240 V, what is the maximum power (wattage) which may be taken from the circuit?
Fig. shows a 3 pin plug with the cover removed. The electric cable
connected to the plug contains 3 wires with colour coded insulation namely brown, blue and green.
- Identify each of the colour coded wires by stating to which of the
terminals A, B or C in the diagram they should be connected. - Identify the terminal through which no current passes in normal
circumstances. - What is the purpose of the earthed wire connected to an electric
appliance like an electric heater? Describe how it works.
A wire is passed through a piece of cardboard as shown in fig .. An electric current flows vertically down the wire and then flows back up. The two sections of the write are observed to repel each other.
(a) Wi th the aid of a diagram, describe how you would plot the magnetic field lines on the card .
(b) Sketch the magnetic field patterns around both the sections of the wire. Use your sketch to explain why the two sections repel each other.
(c) The repulsive force between the two sections is small. What changes could be made to increase it?
Fig . shows the core of a transformer and i ts input and output connections
State the material used for the core and describe th e structure of the core.
(a) Use the values given in the diagram to calculate the turns ratio for the transformer and connections, labeling all parts of the diagram .
(b) If a current of 2 A is taken from th e output, calculate th e current in the input circuit (Assume the transformer to be ideal ).
State the S.I. units of electrical power.
An electric bulb is rated '100 W, 250 V'. How much current will the bulb draw if connected to a 250 V supply?
A bulb is connected to a battery of p.d. 4 V and internal resistance 2.5 Ω . A steady current of 0.5 A flows through the circuit. Calculate:
The resistance of the bulb
Answer the following question.
What is the function of a galvanometer in a circuit?
Problems for practice:
If 3A current flows through a circuit, then convert the current in terms of a milliampere.
