Advertisements
Advertisements
प्रश्न
Explain the need for a feedback circuit in a transistor oscillator.
Advertisements
उत्तर
If the portion of the output fed to the input is in phase with the input, then the magnitude of the input increases. It is necessary for sustained oscillations, so a feedback circuit is needed for a transistor oscillator.
APPEARS IN
संबंधित प्रश्न
The light emitted in an LED is due to
In an npn transistor, the collector current is 24 mA. If 80% of electrons reach collector, its base current in mA is ______.
In a transistor in CE configuration, the ratio of power gain to voltage gain is ____________.
A transistor when connected in common emitter mode has a ____________.
In a transistor, doping level in base is increased slightly, the collector current and base current respectively ______.
A transistor having α = 0.8 is connected in a common emitter configuration. When the base current changes by 6 mA, the change in collector current is ______
A transistor is used as a common emitter amplifier with a load resistance 2 KΩ. The input resistance is 150 Ω. Base current is changed by 20 µA which results in a change in collector current by 1.5 mA. The voltage gain of the amplifier is ______.
A conducting wire has length 'L1' and diameter 'd1'. After stretching the same wire length becomes 'L2' and diameter 'd2' The ratio of resistances before and after stretching is ______.
The current amplification factor for a transistor in its common emitter mode is 50. The current amplification factor in the common base mode of the transistor is ______.
In a transistor (common emitter configuration) the ratio of power gain to voltage gain is (α and β are current ratios) ______.
