हिंदी

Differentiate Between Thrust and Pressure.

Advertisements
Advertisements

प्रश्न

Differentiate between thrust and pressure.

टिप्पणी लिखिए
Advertisements

उत्तर

Thrust is the force applied on a surface in a perpendicular direction and it is a vector quantity. The effect of thrust per unit area is pressure, and it is a scalar quantity.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 4: Fluids - Exercise 1 [पृष्ठ १५७]

APPEARS IN

फ्रैंक Physics Part 1 [English] Class 9 ICSE
अध्याय 4 Fluids
Exercise 1 | Q 10 | पृष्ठ १५७

संबंधित प्रश्न

A body sinks in a liquid A but floats in a liquid B. The density of liquid A is ....... than the density of liquid B.


A piece of wood floats on water. The buoyant force on wood will be


What is the unit of relative density?


Describe a simple experiment to demonstrate that a liquid enclosed in a vessel exerts pressure in all directions.


The diagram below in Fig. 4.12 shows a device which makes the use of the principle of transmission of pressure.

  1. Name the parts labelled by the letters X and Y.
  2. Describe what happens to valves A and B and to the quantity of water in the two cylinders when the lever arm is moved down.
  3. Give reasons for what happens to valves A and B in part (ii).
  4. What happens when the release valve is opened?
  5. What happens to valve B in cylinder P when the lever arm is moved up?
  6. Give a reason for your answer in part (v).
  7. State one use of the above device.

A vessel contains water up to a height of 1.5 m. Taking the density of water 103 kg m-3, acceleration due to gravity 9.8 m s-2 and area of base of vessel 100 cm2, calculate: (a) the pressure and (b) the thrust at the base of vessel.


You are provided with a hollow iron ball A of volume 15 cm3 and mass 12 g and a solid iron ball B of mass 12 g. Both are placed on the surface of water contained in a large tub.

  1. Find upthrust on each ball.
  2. Which ball will sink? Give a reason for your answer (Density of iron = 8.0 g cm-3) 

A homogeneous block floats on water (a) partly immersed (b) completely immersed. In each case state the position of centre of buoyancy B with respect to the centre of gravity G of the block.


Pressure in a water pipe on the ground floor of a building is 100,000 Pa. Calculate the pressure in the water pipe on the first floor at a height of 3 m. [Density of water = 1000 kgm−3 ; g = 10 ms−2]


Write the SI units of Buoyant force


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×