Advertisements
Advertisements
प्रश्न
An extended object is placed at a distance of 5.0 cm from a convex lens of focal length 8.0 cm. (a) Draw the ray diagram (to the scale) to locate the image and from this, measure the distance of the image from the lens. (b) Find the position of the image from the lens formula and see how close the drawing is to the correct result.
Advertisements
उत्तर
Given,
Object distance, (u) = 5.0 cm
Focal length (f) of convex lens = 8.0 cm
(a)
(b)
Using lens formula: \[\frac{1}{v} - \frac{1}{u} = \frac{1}{f}\]
Where v is the image distance,
on putting the given values we get:
\[\frac{1}{v} - \frac{1}{\left( - 5 \right)} = \frac{1}{8}\]
\[ \Rightarrow \frac{1}{v} = \frac{1}{8} - \frac{1}{5}\]
\[ \Rightarrow \frac{1}{v} = \frac{- 3}{40}\]
\[ \therefore v = - 13 . 3 \text{ cm }\]
Hence, the position of the image from the lens is 13.3 cm.
APPEARS IN
संबंधित प्रश्न
A point source of light is placed at a distance of 2 f from a converging lens of focal length f. The intensity on the other side of the lens is maximum at a distance
A particle executes a simple harmonic motion of amplitude 1.0 cm along the principal axis of a convex lens of focal length 12 cm. The mean position of oscillation is at 20 cm from the lens. Find the amplitude of oscillation of the image of the particle.
A converging lens of focal length 15 cm and a converging mirror of focal length 10 cm are placed 50 cm apart. If a pin of length 2.0 cm is placed 30 cm from the lens farther away from the mirror, where will the final image form and what will be the size of the final image?
Two convex lenses, each of focal length 10 cm, are placed at a separation of 15 cm with their principal axes coinciding. (a) Show that a light beam coming parallel to the principal axis diverges as it comes out of the lens system. (b) Find the location of the virtual image formed by the lens system of an object placed far away. (c) Find the focal length of the equivalent lens. (Note that the sign of the focal length is positive although the lens system actually diverges a parallel beam incident on it.)
A ball is kept at a height h above the surface of a heavy transparent sphere made of a material of refractive index μ. The radius of the sphere is R. At t = 0, the ball is dropped to fall normally on the sphere. Find the speed of the image formed as a function of time for \[t < \sqrt{\frac{2h}{g}}\] . Consider only the image by a single refraction.
According to new Cartesian sign conventions, all the distances are measured from the ______.
A spherical surface of radius R separates two medium of refractive indices µ1 and µ2, as shown in figure. Where should an object be placed in the medium 1 so that a real image is formed in medium 2 at the same distance?
A ray of light from a denser medium strikes a rarer medium at an angle of incidence i as shown in the figure. Refracted and reflected rays make an angle of 90° with each other. The angle of reflection and refraction are r and r'. The critical angle is ______.
Define the critical angle for a given pair of media and total internal reflection. Obtain the relation between the critical angle and refractive index of the medium.
Assertion: If critical angle of glass-air pair `("μg" = 3/2)` is θ1 and that of water-air pair `("μw" = 4/3)` is θ2, then the critical angle for the water-glass pair will lie between θ1 and θ2.
Reason: A medium is optically denser if its refractive index is greater.
What is a spherical refracting surface?
According to the Cartesian sign convention for refraction at a spherical surface, all distances are measured from:
Which ray is considered in the first step of the derivation for refraction at a spherical surface?
In the derivation of the spherical surface refraction formula, which approximation is applied to the angles made by the incident ray, refracted ray, and normal?
In the geometrical setup for refraction at a spherical surface, the centre of curvature, object distance, image distance, and radius of curvature are denoted respectively by:
When a light ray strikes a curved surface and refracts, the amount of bending depends on:
