Advertisements
Advertisements
प्रश्न
An electric lamp is labelled 12 V, 36 W. This indicates that it should be used with a 1 V supply. What other information does the label provide?
Advertisements
उत्तर
The label further tells us that the total power consumed by the electric lamp will be 36 W and the current derived by it is 3 A (using the equation, P = VI).
APPEARS IN
संबंधित प्रश्न
If a bulb of 60W is connected across a source of 220V, find the current drawn by it.
State whether an electric heater will consume more electrical energy or less electrical energy per second when the length of its heating element is reduced. Give reasons for your answer.
Electrical power p is given by the expression P = (Q × V) ÷ time. Express the power P in terms of current and resistance explaining the meaning of symbols used there in.
Distinguish between kilowatt and kilowatt-hour.
An electric bulb is rated at 220 V, 100 W. (a) what is its resistance? (b) what safe current can be passed through it?
An electric iron is rated at 750 W, 230 V. Calculate the electrical energy consumed by the iron in 16 hours .
An electric bulb marked 220 V, 100 W will get fused if it is made to consume 150 W or more. What voltage fluctuation will the bulb withstand?
What is the current I in the given circuit (Fig. )?
A simple electric circuit has a 30 V battery and a resistor ot 60 o. What will be the current in the circuit? The resistance of the oonnecting wires is negligible.
What is the current in the circuit shown (Fig. )
Of the three connecting wires in a household circuit: Which two of the three wires are at the same potential? In which of the three wires should the switch be connected?
What is ‘Rating’ of an electric appliance?
State the reason why, in a three pin plug, the earth pin is longer and thicker than the other two.
How does earthing prevent electrical shock?
At what voltage is the electric power generated at the generating station? Explain the transmission of this power to your house.
Three 250 W heaters are connected in parallel to a 100 V supply, Calculate total current taken from the supply.
Establish the relation that heat produced in a metallic conductor due to the flow of current is V2t/R joules, where V is the potential difference across the ends of the conductor, R its resistance and t is the time in second for which current flows.
