Advertisements
Advertisements
प्रश्न
An electric lamp is labelled 12 V, 36 W. This indicates that it should be used with a 1 V supply. What other information does the label provide?
Advertisements
उत्तर
The label further tells us that the total power consumed by the electric lamp will be 36 W and the current derived by it is 3 A (using the equation, P = VI).
APPEARS IN
संबंधित प्रश्न
Two lamps, one rated 100 W at 220 V, and the other 60 W at 220 V, are connected in parallel to electric mains supply. What current is drawn from the line if the supply voltage is 220 V?
Define watt-hour. How many joules are equal to 1 watt-hour?
A bulb is rated as 250 V; 0.4 A. Find its : (i) power, and (ii) resistance.
When a current of 4.0 A passes through a certain resistor for 10 minutes, 2.88 × 104 J of heat are produced. Calculate
the power of the resistor.
the voltage across the resistor.
A current passes through a resistor. Let K1 and K2 represent the average kinetic energy of the conduction electrons and the metal ions, respectively.
What is the current in the circuit shown (Fig. )
Tick(✓) the correct choice in the following:
In the circuit shown in the following fig, the e.m.f. of the cell is 4 volts, the current
flowing through the resistor is
The diagram shows a coil connected to a center zero galvanometerG . The galvanometer shows a deflect ion to the right when the north pole N of a powerful magnet is moved to the right as shown .
(i) Explain, why the defelct ion occurs in the galvanometer.
(ii ) State whether th e current in the coil is cl ockwise or anticl ockwise
when viewed from the end P.
(iii ) State th e observation in G when the coil is moved away from north
pole N of the magnet keeping the magnet stationary.
(iv)State the observation in G when both the coil and the magnet are
moved to right at th e same speed .
What is electric power? State and define its S.I. unit.
What is ‘Rating’ of an electric appliance?
What would happen and why, to an electric bulb when it is connected across a supply of voltage (i) lower (ii) higher than its proper rating?
Two electric lamps each rating 100 W, 110 V are connected in series to a 220 V power supply and two other electric lamps each of marking 100 W, 220 V are connected in parallel to the same power supply. Will anyone of the two combinations give more light than the other? Give a reason for your answer.
What do you understand by ‘earthing’? What are the advantages of earthing in a household electric circuit? Explain, how it is done?
State the reason why, in a three pin plug, the earth pin is longer and thicker than the other two.
Three 250 W heaters are connected in parallel to a 100 V supply, Calculate the resistance of each heater.
An electric bulb is rated 240V-60W and is working at 100% efficiency.
(i) Calculate the resistance of bulb.
(ii) (a) Draw the circuit diagram.
(b) What is the rate of conversion of energy in each bulb?
(c) Total power used by the bulbs.
A bulb is connected to a battery of e.m.f. 6V and internal resistance 2Ω A steady current of 0.5A flows through the bulb. Calculate the resistance of the bulb.
A house is provided with 15 bulbs of 40W, 5 bulbs of 100W, 5 fans of 80 W, and one heater of 1.0 kW. Each day bulbs are used for 4h, fans for lOh, and heater for 2h. The voltage of mains is 220 V. Calculate:
(i) Maximum power of the circuit in the house,
(ii) maximum current capacity of the main fuse in the house,
(iii) the electrical energy consumed in a week,
(iv) cost of electricity consumed at 1.25 Rs. per kWh.
A torch bulb is rated at 3 V and 600 mA. Calculate it’s
- power
- resistance
- energy consumed if it is used for 4 hours.
