Advertisements
Advertisements
प्रश्न
A wire of length 1 m and radius 0.1 mm has a resistance of 100 Ω. Find the resistivity of the material.
Advertisements
उत्तर
Let ρ be the resistivity of the wire.
Given:-
Length, l = 1 m
Radius, r = 0.1 × 10–3 m
Area, A = πr2
Resistance, R = 100 Ω
We know:-
`R = rho l/A`
⇒ `rho = (RA)/l`
= `(100 xx pi xx 0.1 xx 0.1 xx 10^-6)/1`
= `pi xx 10^-6 Omegam`
APPEARS IN
संबंधित प्रश्न
A negligibly small current is passed through a wire of length 15 m and uniform cross-section 6.0 × 10−7 m2, and its resistance is measured to be 5.0 Ω. What is the resistivity of the material at the temperature of the experiment?
Choose the correct alternative:
Alloys of metals usually have (greater/less) resistivity than that of their constituent metals.
A heating element is marked 210 V, 630 W. What is the value of the current drawn by the element when connected to a 210 V dc source?
A heating element is marked 210 V, 630 W. Find the resistance of the element when connected to a 210 V dc source.
Two wires of equal length, one of copper and the other of manganin have the same resistance. Which wire is thicker?
Plot a graph showing the variation of stopping potential with the frequency of incident radiation for two different photosensitive materials having work functions W1 and W2 (W1 > W2). On what factors does the (i) slope and (ii) intercept of the lines depend?
Two resistors A and B have resistances RA and RB, respectively, and RA < RB. The resistivities of their materials are ρA and ρB.
The electrochemical equivalent of a material depends on _______________ .
How does the resistivity of a semiconductor change with rise of temperature ? Explain.
If R1 and R2 are filament resistances of a 200 W and a 100 W bulb respectively, designed to operate on the same voltage, then:
Choose the correct alternative:
The resistivity of the alloy manganin is nearly independent of/increases rapidly with increase of temperature.
Choose the correct alternative:
The resistivity of a typical insulator (e.g., amber) is greater than that of a metal by a factor of the order of (1022/1023).
The resistivity of alloy manganin is ______.
Fuse wire should have
If the last band on the carbon resistor is absent, then the tolerance is ______
