हिंदी

A violin string vibrates with the fundamental frequency of 510 Hz. What is the frequency of the first overtone?

Advertisements
Advertisements

प्रश्न

A violin string vibrates with the fundamental frequency of 510 Hz. What is the frequency of the first overtone? 

योग
Advertisements

उत्तर

Frequency of first overtone, n1 = 2n

= 2 × 510

= 1020 Hz

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 6: Superposition of Waves - Very Short Answer

APPEARS IN

संबंधित प्रश्न

A pipe open at both the ends has a fundamental frequency of 600 Hz. The first overtone of a pipe closed at one end has the same frequency as the first overtone of the open pipe. How long are the two pipes?

(Given: v = 330 m/s)


A string 1m long is fixed at one end. The other end is moved up and down with frequency of 15 Hz. Due to this, a stationary wave with four complete loops gets produced on the string. Find the speed of the progressive wave which produces the stationary wave.
[Hint: Remember that the moving end is an antinode.]


The equation of a simple harmonic progressive wave is given by, y = 5cosπ`[200t - x/150]`, where x and y are in cm and ‘t’ is in second. Then the velocity of the wave is ______.


The integral multiple of fundamental frequencies are ______ 


Distinguish between an overtone and harmonic. 


At the poles, a stretched wire of a given length vibrates in unison with a tuning fork. At the equator, for same setting to produce resonance with same fork. the vibrating length of wire ______.


Two open pipes of different lengths and same diameter in which the air column vibrates with fundamental frequencies 'n1', and 'n2' respectively. When both pipes are joined to form a single pipe, its fundamental frequency will be ______.


A thin wire of 99 cm is fixed at both ends as shown in figure. The wire is kept under a tension and is divided into three segments of lengths l1, l2, and l3 as shown in figure. When the wire is made to vibrate respectively with their fundamental frequencies in the ratio 1:2:3. Then the lengths l1, l2, and l3 of the segments respectively are (in cm).


A uniform rope of mass 6 kg hangs vertically from a rigid support. A block of mass 2 kg is attached to the free end of the rope. A transverse pulse of wavelength 0.06 m is produced at the lower end of the rope. The wavelength of the pulse, when it reaches the top is ______. (in m) 


An open organ pipe produces its fundamental frequency f. When the pipe is dipped in water so that `2/5` of its length is under water, then its 5 fundamental frequency becomes ____________.


Transverse waves of the same frequency are generated in two steel wires A and B. The diameter of A is twice that of B and the tension in A is half that in B. The ratio of the velocities of waves in A and B is ____________.


Length of an organ pipe open at both ends is 34 cm. If velocity of sound is 340 m is, then the frequency of 2nd overtone is ______.


A transverse wave propagating along the string is y = 0.3 sin (x + 20t) where x, y are in metre and t in second. The linear density of the string is 1.2 x 10-4 kg/m. The tension in the string is ______.


A tuning fork with frequency 800 Hz produces resonance in a resonance column tube with upper end open and lower end closed by water surface. Successive resonances are observed at lengths 9.75 cm, 31.25 cm and 52.75 cm. The speed of sound in air is, ____________.


'n' number of waves are produced on a string in 0.5 seconds. Now the tension in a string is doubled (Keeping radius constant). The number of waves produced in 0.5 seconds for the same harmonic will be ______


A pipe closed at one end produces a fundamental note of frequency 'v'. It is cut into two pipes of equal length. The fundamental frequencies produced in the two pipes are ______.


The equation of stationary wave on a string clamped at both ends and vibrating in the third harmonic is given by y = 0.5 sin (0.314 x) cos (600 πt), where x and y are in cm and t in second. The length of the vibrating string is ______
(π = 3.14) 


The closed and open organ pipes have same length. When they are vibrating simultaneously in first overtone, produce three beats. The length of open pipe is made `1/3` rd and closed pipe is made three times the original, the number of beats produced will be ______.


If the end correction of an open pipe is 0.8 cm, then the inner radius of that pipe will be ______.


A pipe Pc closed at one end and point Po open at both ends are vibrating in the second overtone. They are in resonance with a given tuning fork. The ratio of the length of pipe Pc to that of pipe, Po is ______.

(Neglect end correction).


An open pipe is in resonance in its 2nd harmonic with tuning fork of frequency f1. Now, it is closed at one end. If the frequency of the tuning fork is increased slowly from f1, then again a resonance is obtained with a frequency f2. If in this case the pipe vibrates nth harmonic, then ______.


A stretched string 0.7 m long and fixed at its ends vibrates in the second overtone of frequency 300 Hz. Find the speed of the transverse wave on the string.


Two wires, each 1 m long and of the same diameter, have densities 8 × 103 kg/m3 and 2 × 103 kg/m3 and are stretched by tensions 196 N and 49 N respectively. Compare their fundamental frequencies.


Prove that for pipe closed at one end, the end correction is `e = (n_2l_2-n_1l_1)/(n_1-n_2)`


Two organ pipe, open at both ends, are sounded together and 5 beats are heard per second. The length of shorter pipe is 0.25 m. Find the length of the other pipe. (Given: Velocity of sound in air = 350 m/s and end correction at one end = 0.015 m, same for both pipes.)


A wire of length L, diameter 'd' density of material 'e' is under tension 'T', having fundamental frequency of vibration nA. Another wire of length 2L, tension 2T, density 2e and diameter 3d has fundamental frequency of vibration nB. The ratio nB: NA is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×