हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान कक्षा ११

A Chain of Length L and Mass M Lies on the Surface of a Smooth Sphere of Radius R > L with One End Tied to the Top of the Sphere. Find the Tangential Acceleration D ν D T of the Chain When the

Advertisements
Advertisements

प्रश्न

A chain of length l and mass m lies on the surface of a smooth sphere of radius R > l with one end tied to the top of the sphere.  Find the tangential acceleration \[\frac{d\nu}{dt}\] of the chain when the chain starts sliding down.

 
संख्यात्मक
Advertisements

उत्तर

Let us consider a small element, which makes angle 'dθ' at the centre.

\[\therefore dm = \rho \left( \frac{m}{L} \right) Rd\theta\]

Since,

\[K . E . = \frac{1}{2}\text{m}\nu^2 \]
\[ = \frac{\text{m}R^2 g}{L} \left[ \sin \left( \frac{L}{R} \right) \right]\]

Taking derivative of both sides with respect to 't', we get:

\[\left( \frac{1}{2} \right) \times 2\nu \times \frac{d\nu}{dt}\]

\[ = \frac{R^2 g}{L}\left[ \cos \theta - \frac{d\theta}{dt} - \cos \left( \theta + \frac{L}{R} \right)\frac{d\theta}{dt} \right]\]

\[ \therefore \left[ R - \frac{d\theta}{dt} \right]\frac{dv}{dt}\]

\[ = \frac{R^2 g}{L} \times \frac{d\theta}{dt}\left[ \cos \theta - \cos \left( \theta + \frac{L}{R} \right) \right]\]

\[\left( \text{ because } \nu = R\omega = R\frac{d\theta}{dt} \right)\]

\[ \therefore \frac{d\nu}{dt} = \frac{Rg}{L}\left[ \cos \theta - \cos \left( \theta + \frac{L}{R} \right) \right]\]

When the chain starts sliding down, \[\theta = 0^\circ\]

\[\therefore \frac{d\nu}{dt} = \frac{Rg}{L}\left[ 1 - \cos \left( \frac{L}{R} \right) \right]\]
 
shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 8: Work and Energy - Exercise [पृष्ठ १३७]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
अध्याय 8 Work and Energy
Exercise | Q 63.3 | पृष्ठ १३७

संबंधित प्रश्न

A ball is given a speed v on a rough horizontal surface. The ball travels through a distance l on the surface and stops. what are the initial and final kinetic energies of the ball?  


A ball is given a speed v on a rough horizontal surface. The ball travels through a distance l on the surface and stops. What is the work done by the kinetic friction? 


In a factory, 2000 kg of metal needs to be lifted by an engine through a distance of 12 m in 1 minute. Find the minimum horsepower of the engine to be used.

 

A block of mass 100 g is moved with a speed of 5⋅0 m/s at the highest point in a closed circular tube of radius 10 cm kept in a vertical plane. The cross-section of the tube is such that the block just fits in it. The block makes several oscillations inside the tube and finally stops at the lowest point. Find the work done by the tube on the block during the process.


A block weighing 10 N travels down a smooth curved track AB joined to a rough horizontal surface (In the following figure). The rough surface has a friction coefficient of 0⋅20 with the block. If the block starts slipping on the track from a point 1⋅0 m above the horizontal surface, how far will it move on the rough surface?


A block of mass 5 kg is suspended from the end of a vertical spring which is stretched by 10 cm under the load of the block. The block is given a sharp impulse from below, so that it acquires an upward speed of 2 m/s. How high will it rise? Take g = 10 m/s2


A block of mass 250 g is kept on a vertical spring of spring constant 100 N/m fixed from below. The spring is now compressed 10 cm shorter than its natural length and the system is released from this position. How high does the block rise ? Take g = 10 m/s2.  

 

A simple pendulum consists of a 50 cm long string connected to a 100 g ball. The ball is pulled aside so that the string makes an angle of 37° with the vertical and is then released. Find the tension in the string when the bob is at its lowest position. 


Following figure following shows a smooth track, a part of which is a circle of radius R. A block of mass m is pushed against a spring of spring constant k fixed at the left end and is then released. Find the initial compression of the spring so that the block presses the track with a force mg when it reaches the point P, where the radius of the track is horizontal.


A heavy particle is suspended by a 1⋅5 m long string. It is given a horizontal velocity of \[\sqrt{57} \text{m/s}\] (a) Find the angle made by the string with the upward vertical when it becomes slack. (b) Find the speed of the particle at this instant. (c) Find the maximum height reached by the particle over the point of suspension. Take g = 10 m/s2

 

A particle of mass m is kept on the top of a smooth sphere of radius R. It is given a sharp impulse which imparts it a horizontal speed ν. (a) Find the normal force between the sphere and the particle just after the impulse. (b) What should be the minimum value of ν for which the particle does not slip on the sphere? (c) Assuming the velocity ν to be half the minimum calculated in part, (b) find the angle made by the radius through the particle with the vertical when it leaves the sphere.


Figure ( following ) shows a smooth track which consists of a straight inclined part of length l joining smoothly with the circular part. A particle of mass m is projected up the incline from its bottom.Assuming that the projection-speed is only slightly greater than \[\nu_0\] , where will the block lose contact with the track?


A chain of length l and mass m lies on the surface of a smooth sphere of radius R > l with one end tied to the top of the sphere.  Find the gravitational potential energy of the chain with reference level at the centre of the sphere.


A chain of length l and mass m lies on the surface of a smooth sphere of radius R > l with one end tied to the top of the sphere.  Suppose the chain is released and slides down the sphere. Find the kinetic energy of the chain, when it has slid through an angle θ.


An electron and a proton are moving under the influence of mutual forces. In calculating the change in the kinetic energy of the system during motion, one ignores the magnetic force of one on another. This is because ______.


A man, of mass m, standing at the bottom of the staircase, of height L climbs it and stands at its top.

  1. Work done by all forces on man is equal to the rise in potential energy mgL.
  2. Work done by all forces on man is zero.
  3. Work done by the gravitational force on man is mgL.
  4. The reaction force from a step does not do work because the point of application of the force does not move while the force exists.

Give example of a situation in which an applied force does not result in a change in kinetic energy.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×