Advertisements
Advertisements
प्रश्न
A carrier wave of peak voltage 15 V is used to transmit a message signal. Find the peak voltage of the modulating signal in order to have a modulation index of 60%
Advertisements
उत्तर
The amplitude of the carrier wave, Ac = 15 V
Modulation index, m = 60% = 0.60
Amplitude of the modulating wave = Am
Using the relation for modulation index:
`m = A_m/A_c`
`:. A_m = mA_c`
`= 0.60 xx 15 = 9 V`
APPEARS IN
संबंधित प्रश्न
The process of superimposing a low frequency signal on a high frequency wave is_______ .
State three important factors showing the need for translating a low frequency signal into a high frequency wave before transmission
Draw a sketch of a sinusoidal carrier wave along with a modulating signal and show how these are superimposed to obtain the resultant amplitude modulated wave
The carrier wave is given by
C(t) = 2sin(8πt) volt.
The modulating signal is a square wave as shown. Find modulation index.
Due to economic reasons, only the upper sideband of an AM wave is transmitted, but at the receiving station, there is a facility for generating the carrier. Show that if a device is available which can multiply two signals, then it is possible to recover the modulating signal at the receiver station.
Why is Modulation index kept low?
In the given block diagram of a receiver, identify the boxes labeled as X and Y and write their functions.
Broadcasting antennas are generally ______.
A TV transmission tower antenna is at a height of 20 m. How much service area can it cover if the receiving antenna is (i) at ground level, (ii) at a height of 25 m? Calculate the percentage increase in area covered in case (ii) relative to case (i).
A carrier wave Vc(t) = 160 sin(2π × 106t) volts is made to vary between Vmax = 200 V and Vmin = 120 V by a message signal Vm(t) = Am sin(2π × 103t) volts. The peak voltage Am of the modulating signal is ______.
