Advertisements
Advertisements
प्रश्न
Write three important steps required to determine molar conductivity.
Advertisements
उत्तर
- Determination of cell constant:
Cell constant is determined by using KCl solution of known concentration in the conductivity cell. The resistance of this KCl solution is measured by Wheatstone bridge.
Now, cell constant = `"k"_"KCl" xx "R"_"solution"`
Conductivity of KCl solution is known. Thus, cell constant is calculated. - Determination of conductivity of given solution:
KCl solution in the conductivity cell in step (1) is replaced by the given solution whose conductivity is to be measured. Its resistance is measured by the Wheatstone bridge. The conductivity of given solution is then calculated as:
k = `"Cell constant"/("R"_("solution"))` - Calculation of molar conductivity:
The molar conductivity of the given solution is then calculated using equation:
Λ = `(1000"k")/"c"`
APPEARS IN
संबंधित प्रश्न
0.05 M NaOH solution offered a resistance of 31.6 Ω in a conductivity cell at 298 K. If the cell constant of the cell is 0.367 cm-1, calculate the molar conductivity of NaOH solution.
What is a cell constant? What are its units? How is it determined experimentally?
Answer the following in one or two sentences.
Write the relationship between conductivity and molar conductivity and hence unit of molar conductivity.
Answer the following in brief.
Explain the effect of dilution of the solution on conductivity.
Write an equation that shows the relationship between molar conductivity and degree of dissociation of weak electrolyte.
Molar conductance of BaCl2, H2SO4 and HCl at infinite dilution are X1, X2 and X3 respectively. Molar conductance of BaSO4 at infinite dilution is ____________.
The CORRECT unit of molar conductivity is ____________.
For the reaction \[\ce{A -> B}\], the rate increases by a factor of 2.25 when the concentration of A is increased by 1.5. What is the order of the reaction?
What will be the concentration of NaCl solution, if the molar conductivity and conductivity of NaCl solution is 124.3 Ω−1 cm2 mol−1 and 1.243 × 10−4 Ω−1 cm2 respectively?
The molar conductance of 0.001 M acetic acid is 50 ohm−1 cm2 mol−1. The limiting molar conductance is 250 ohm−1 cm2 mol−1. What is its degree of ionization?
A conductivity cell having cell constant 8.76 cm−1, placed in 0.01 M solution of an electrolyte offered a resistance of 1000 ohms. What is the specific conductance of electrolytes?
Which among the following solution has the highest conductivity (k) value?
Conductivity of KCI solution is 0.0027 Ω−1 m−1 at 25°C. The resistance of the solution is 82.4 Ω. The cell constant is ____________ m−1.
The molar conductivities at zero concentration for Ca2+ and CaCl2 are 104 and 256.8 Ω−1 cm2 mol−1 respectively. The molar conductivity at zero concentration for Cl− is ____________.
What is the common unit of conductivity if the dimensions are expressed in centimeter?
A conductivity cell dipped in 0.01 M AgNO3 solution gives a resistance of 3160 ohms. If cell constant is 0.47 cm−1, what is the conductivity of AgNO3 solution?
What is the value of cell constant if conductance and conductivity of a solution is same?
What will be the concentration of NaCl solution, if the molar conductivity and conductivity of NaCl solution is 124.3 Ω-1 cm2 mol-1 and 1.243 × 10-4 Ω-1 cm2 respectively?
What is the SI unit of conductivity?
Calculate molar conductivity for 0.5 M BaCl2 if its conductivity at 298K is 0.01 Ω–1 cm–1.
Molar conductivities at infinite dilution of Mg2+ and Br- are 105.8 Ω-1 cm2 mol-1 and 78.2 Ω-1 cm2 mol-1 respectively. Calculate molar conductivity at zero concentration of MgBr2.
What is the SI unit of molar conductivity?
Write the relation between molar conductivity and molar ionic conductivities for the electrolytes:
- Na2SO4
- AlCl3
