Advertisements
Advertisements
प्रश्न
Write the functions of the three segments of a transistor.
Advertisements
उत्तर
Emitter : It supplies a large number of majority carriers for the current flow through the transistor.
Base : The thin base allows most of the majority charge carriers coming from emitter to appear in the base-collector junction.
Collector : This segment collects major portion of the majority carriers supplied by the emitter.
APPEARS IN
संबंधित प्रश्न
What are α and β parameters for a transistor? Obtain a relation between them.
Write clearly, why in the case of a transistor (i) the base is thin and lightly doped
Write clearly, why in the case of a transistor (ii) the emitter is heavily doped.
Differentiate between three segments of a transistor on the basis of their size and level of doping.
How is a transistor biased to be in active state?
The figure shows the input waveforms A and B for ‘AND’ gate. Draw the output waveform and write the truth table for this logic gate.
Draw a typical input and output characteristics of an n-p-n transistor in CE configuration. Show how these characteristics can be used to determine (a) the input resistance (r1), and (b) current amplification factor (β)
The output characteristic curve of a transistor at constant input current is plotted between
Consider the circuit arrangement shown in figure (a) for studying input and output characteristics of npn transistor in CE configuration.
 (a) |
 (b) |
Select the values of RB and RC for a transistor whose VBE = 0.7 V, so that the transistor is operating at point Q as shown in the characteristics shown in figure (b). Given that the input impedance of the transistor is very small and VCC = VBB = 16 V, also find the voltage gain and power gain of the circuit making appropriate assumptions.
If an emitter current is changed by 4 mA, the collector current changes by 3.5 mA. The value of β will be ______.
