Advertisements
Advertisements
प्रश्न
Write the formula of resistivity
Advertisements
उत्तर
Resistance R of a conductor depends on the length ‘l’ and area of cross section ‘A’ of the conductor
`R alpha l`
and `R alpha l/A`
`:. R alpha l/A`
`:. R = rho 1/A` ...(ρ is constant)
where ρ is called resistivity of the conductor.
APPEARS IN
संबंधित प्रश्न
Will current flow more easily through a thick wire or a thin wire of the same material, when connected to the same source? Why?
Is Ohm’s law universally applicable for all conducting elements? If not, give examples of elements which do not obey Ohm’s law.
Name the physical quantity whose unit is "ohm".
How should the two resistances of 2 ohms each be connected so as to produce an equivalent resistance of 1 ohm?
An electric bulb draws 1.2 A current at 6.0 V. Find the resistance of filament of bulb while glowing.
Calculate the current flowing through a wire of resistance 5 Ω connected to a battery of potential difference 3 V.
Show by a diagram how two resistors R1 and R2 are joined in parallel. Obtain an expression for the total resistance of the combination.
In the circuit shown below in Fig, calculate the value of x if the equivalent resistance between A and B is 4 Ω.
A metal sphere is kept on an insulting stands. A negatively charged rod is brought near it, then the sphere is earthed as shown. On removing the earthing, and taking the negatively charged rod away, what will be the nature of charge on the sphere? Give reason for your answer.
What are ohmic conductors? Give one exmaple. Draw a graph showing the current-voltage relationship for an ohmic conductor.
Answer the following question.
Distinguish between Ohmic and non-ohmic substances; explain with the help of example.
Ohm’s law states the relationship between power and voltage.
A wire connected to a power supply of 230 V has power dissipation P1. Suppose the wire is cut into two equal pieces and connected parallel to the same power supply. In this case, power dissipation is P2. The ratio of `"P"_2/"P"_1` is
What is ohmic device?
Explain the equivalent resistance of a series resistor network.
Explain the equivalent resistance of a parallel resistor network.
Two cells of same emf E but internal resistance r1 and r2 are connected in series to an external resistor R (Figure). What should be the value of R so that the potential difference across the terminals of the first cell becomes zero.
Two conductors are made of the same material and have the same length. Conductor A is a solid wire of diameter 1 mm. Conductor B is a hollow tube of outer diameter 2 mm and inner diameter 1 mm. Find the ratio of resistance RA to RB.
Let the resistance of an electrical device remain constant, while the potential difference across its two ends decreases to one fourth of its initial value. What change will occur in the current through it? State the law which helps us in solving the above stated question.
The resistance of a resistor is reduced to half of its initial value. If other parameters of the electrical circuit remain unaltered, the amount of heat produced in the resistor will become ______.
