Advertisements
Advertisements
प्रश्न
Advertisements
उत्तर
APPEARS IN
संबंधित प्रश्न
Draw a neat and labelled diagram of a screw gauge.
Name its main parts and state their functions.
Fig., below shows the reading obtained while measuring the diameter of a wire with a screw gauge. The screw advances by 1 division on the main scale when circular head is rotated once.
Find:
(i) Pitch of the screw gauge,
(ii) Least count of the screw gauge and
(iii) The diameter of the wire.
The final result of the calculation in an experiment is 125,347,200. Express the number in term of significant place when accuracy is between 1 and 1000
Name the measuring employed to measure the diameter of a pencil.
The following diagrams (Fig. 5) show the use of a vernier caliper under three different situations. Study the diagrams carefully and note down the vernier readings in each case.
(a) Measuring the diameter of the rod
(b) Measuring Internal diameter of a cavity
(c) Measuring depth of a cavity
On a vernier calliper, 25 vernier scale divisions are equal in length to 24 main scale divisions. One main scale division is 1 mm. Find the least count of the instrument.
In a vernier calipers, (N + 1) divisions of vernier scale coincide with N divisions of main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is ______.
