Advertisements
Advertisements
प्रश्न
What is meant by wattles current?
Advertisements
उत्तर
The component of current (IRMS sin φ), which has a phase angle of \[\frac{\pi}{2}\] with the voltage is called reactive component. The power consumed is zero. So that it is also known as ‘Wattless’ current.
APPEARS IN
संबंधित प्रश्न
A resistor of 500 Ω and an inductance of 0.5 H are in series with an AC source which is given by V = `100 sqrt2` sin (1000 t). The power factor of the combination is ______.
Alternating emf of e = 220 sin 100 πt is applied to a circuit containing an inductance of (1/π) henry. Write an equation for instantaneous current through the circuit. What will be the reading of the AC galvanometer connected in the circuit?
L-C-R series circuit contains a resistance of 10 Ω and self-inductance 0.4 H connected in series with variable capacitor across 60 V and 50 Hz supply. The value of capacity at resonance will be π2 = 10.
An alternating e.m.f. of 0.2 V is applied across an LCR series circuit having R = 4 `Omega`, C = 80 µF and L = 200 mH. At resonance the voltage drop across the inductor is ____________.
In series LCR circuit, resistance is 18 `Omega` and impedance is 33 `Omega`. An r.m.s. voltage of 220 V is applied across the circuit. The true power consumed in a.c. circuit is ____________.
Two unknown resistances are connected in two gaps of a meter-bridge. The null point is obtained at 40 cm from left end. A 30 Ω resistance is connected in series with the smaller of the two resistances, the null point shifts by 20 cm to the right end. The value of smaller resistance Ω is ______.
In series LCR circuit R = 18 Ω and impedance is 33 Ω An rms voltage 220V is applied across the circuit. The ture power consumed in AC circuit is ______.
A conductor lies along the Z-axis at −1.5 ≤ Z ≤ 1.5 m and carries a fixed current of 10.0 A in −az direction as (see figure). For a field B = 3.0 × 10−4`"e"^(−0.2"x")`ay T, find the power required to move the conductor at constant speed to x = 2.0 m, y = 0 in 5 × 10−3 s. Assume parallel motion along the x-axis.
Where is the power dissipated in an alternating current circuit?
In an a.c. circuit, voltage and current are given by:
V = 100 sin (100 t) V and I = `100 sin (100 t + pi/3)` mA respectively.
The average power dissipated in one cycle is:
