Advertisements
Advertisements
प्रश्न
Unit of power used in mechanical engineering is ______.
पर्याय
watt
horse power
erg per second
Advertisements
उत्तर
Unit of power used in mechanical engineering is horse power.
APPEARS IN
संबंधित प्रश्न
A family uses 8 kW of power.
- Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?
- Compare this area to that of the roof of a typical house.
The S.I. unit of power is ..........
Choose one or more correct alternatives.
Power is a measure of the ______.
- The rapidity with which work is done.
- Amount of energy required to perform the work.
- The slowness with which work is performed.
- Length of time.
A ball with a velocity of 5 ms−1 impinges at an angle of 60˚ with the vertical on a smooth horizontal plane. If the coefficient of restitution is 0.5, find the velocity and direction after the impact.
An engine develops 20 kW power. How much time will it take to lift a mass of 200 kg to a height of 50 m? (g = 10 m/s2)
Water falls from a height of 60 m at the rate of 15 kg/s to operate a turbine. The losses due to frictional force are 10% of the input energy. How much power is generated by the turbine? (g = 10m/s2)
A man is throwing bricks of mass 2 kg onto a floor from a height of 2 m. Bricks reach the floor at a speed `2sqrt(10)` m/s. Man throws 10 bricks in a minute. If the power of man is W watt then `3/10` W is equal to ______ W.
Sand is being dropped from a stationary dropper at a rate of 0.5 kgs-1 on a conveyor belt moving with a velocity of 5 ms-1. The power needed to keep belt moving with the same velocity will be ______.
Calculate the power spent by a crane while lifting a load of mass 2000 kg, at velocity of 1.5 ms-1. (g = 10 ms-2)
At any instant of time t, the displacement of any particle is given by 2t – 1 (SI unit) under the influence of force of 5N. The value of instantaneous power is (in SI unit):
