Advertisements
Advertisements
प्रश्न
The least count of a vernier calipers is :
पर्याय
1 cm
0.001 cm
0.1 cm
0.01 cm
Advertisements
उत्तर
The least count of a vernier calipers is 0.01 cm
APPEARS IN
संबंधित प्रश्न
Name the two scales of a vernier callipers and explain how it is used to measure length correct up to 0.01 cm.
Name the part of the vernier callipers which is used to measure the following
External diameter of a tube
The diameter of a thin wire can be measured by
The thimble of a screw gauge has 50 divisions. The spindle advances 1 mm when the screw is turned through two revolutions.
(i) What is the pitch of the screw gauge?
(ii) What is the least count of the screw gauge?
A micrometre screw gauge having a positive zero error of 5 divisions is used to measure diameter of a wire, when reading on the main scale is 3rd division and the 48th circular scale division coincides with baseline. If the micrometer has 10 divisions to a centimetre on the main scale and 100 divisions on a circular scale, calculate
- Pitch of screw
- Least count of screw
- Observed diameter
- Corrected diameter.
A measuring cylinder is filled with water up to a level of 30 ml. A solid body is immersed in it so that the level of water rises to 37 ml. Now the solid body is tied with a cork and then immersed in water so that the water level rises to 40 ml. Find the volume of the solid body and the cork.
State whether the following statement is true or false by writing T/F against it.
The diameter of a wire can be measured more accurately by using vernier calipers than by a screw gauge.
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
In a vernier calliper, (N + 1) divisions of the vernier scale coincide with N divisions of the main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is ______.
