Advertisements
Advertisements
प्रश्न
The combination of two bar magnets makes 10 oscillations per second in an oscillation magnetometer when like poles are tied together and 2 oscillations per second when unlike poles are tied together. Find the ratio of the magnetic moments of the magnets. Neglect any induced magnetism.
Advertisements
उत्तर
Given :
Number of oscillations per second made by the combination of bar magnets with like poles, `V_1 = 10 s^-1`
Number of oscillations per second made by the combination of bar magnets with unlike poles, `V_2 = 2 s^-1`
The frequency of oscillations in the magnetometer `(V)` is given by
`V = 1/(2pi) sqrt((MB_H)/I)`
When like poles are tied together, the effective magnetic moment is `M = M_1 - M_2`
When unlike poles are tied together, the effective magnetic moment is `M = M_1 + M_2`
As the frequency of oscillations is directly proportional to the magnetic moment ,
`V_1/V_2 = sqrt((M_1 - M_2)/(M_1 + M_2))`
⇒ `(10/2)^2 = (M_1 - M_2)/(M_1 + M_2)`
⇒ `25/1 = (M_1 - M_2)/(M_1 + M_2)`
⇒ `(25 + 1)/(25 - 1) = (M_1 - M_2+M_1 + M_2)/(M_1 - M_2-M_1-M_2)`
⇒ `26/24 = (2M_1)/(-2M_2)`
⇒ `M_1/M_2 = -26/24 = -13/12`
Hence, the ratio of the effective magnetic moment is `-13/12`
APPEARS IN
संबंधित प्रश्न
State two advantages of an electromagnet over a permanent magnet.
Why is the core of an electromagnet made of ferromagnetic materials?
Why should the material used for making permanent magnets have high coercivity?
Compare the direction of the magnetic field inside a solenoid with that of the field there if the solenoid is replaced by its equivalent combination of north pole and south pole.
Which of the following four graphs may best represent the current-deflection relation in a tangent galvanometer?
To measure the magnetic moment of a bar magnet, one may use
(a) a tangent galvanometer
(b) a deflection galvanometer if the earth's horizontal field is known
(c) an oscillation magnetometer if the earth's horizontal field is known
(d) both deflection and oscillation magnetometer if the earth's horizontal field is not known
Figure shows some of the equipotential surfaces of the magnetic scalar potential. Find the magnetic field B at a point in the region.
A bar magnet has a length of 8 cm. The magnetic field at a point at a distance 3 cm from the centre in the broadside-on position is found to be `4 xx 10^-6 "T"`.Find the pole strength of the magnet.
If the earth's magnetic field has a magnitude 3.4 × 10−5 T at the magnetic equator of the earth, what would be its value at the earth's geomagnetic poles?
The needle of a dip circle shows an apparent dip of 45° in a particular position and 53° when the circle is rotated through 90°. Find the true dip.
A moving-coil galvanometer has a 50-turn coil of size 2 cm × 2 cm. It is suspended between the magnetic poles producing a magnetic field of 0.5 T. Find the torque on the coil due to the magnetic field when a current of 20 mA passes through it.
Which property of soft iron makes it useful for preparing electromagnet?
What should be retentivity and coercivity of permanent magnet?
Answer in brief.
Explain one application of electromagnet.
The relation b/w magnetic susceptibility xm and relativ~ permeability µr is
Which of the following is most suitable for the core of an electromagnet?
