Advertisements
Advertisements
प्रश्न
State the effect of force F in of the following diagram.
Advertisements
उत्तर १
Wheel turns about the axis of rotation i.e. about pivot on applying force.
उत्तर २
In the given diagram, the force F is applied tangentially to the wheel at its edge. The effect of this force is:
-
Rotational Motion: The force F causes the wheel to rotate about its pivot. This is due to the creation of a torque, which depends on the magnitude of the force and the distance from the pivot.
-
Translational Motion (if friction permits): The wheel may also move forward (translate) if there is sufficient friction between the wheel and the surface.
Thus, the force causes rotation and possibly translation of the wheel.
APPEARS IN
संबंधित प्रश्न
A half metre rod is pivoted at the centre with two weights of 20gf and 12gf suspended at a perpendicular distance of 6 cm and 10 cm from the pivot respectively as shown below.
1) Which of the two forces acting on the rigid rod causes clockwise moment?
2) Is the rod in equilibrium?
3) The direction of 20 kgf force is reversed. What is the magnitude of the resultant moment of the forces on the rod?
Less force is needed when applied at a farther distance from the pivoted point.
The hand flour grinder is provided with a handle near the rim.
What is thrust?
The spanner (or wrench) has a long handle.
The diagram in the figure shows a uniform metre rule weighing 100 gf, pivoted as its centre O. two weight 150 gf and 250 gf hang from the point A and B respectively of the metre rule such that OA = 40 cm and OB = 20 cm . Calculate
the total anticlockwise moment about o.
Three forces A, B and C are acting on a rigid body which can turn about O in fig.9. If all the three forces are applied simultaneously, in which direction will the body move? Explain.
State two factors affecting the turning effect of a force.
A uniform metre scale is balanced at a 40 cm mark when weights of 20 gf and 5 gf are suspended at 5 cm mark and 75 cm mark respectively. Calculate the weight of metre scale.
A metal rod AB of length 80 cm is balanced at 45 cm from the end A with 100 gf weights suspended from the two ends.
- If this rod is cut at the center, C, then compare the weight of AC to the weight of BC. (Use >, < or =)
- Give a reason for your answer in (a).
