Advertisements
Advertisements
प्रश्न
Name two applications of Pascal's law.
Advertisements
उत्तर
Two applications of Pascal's law:
(i) Hydraulic press
(ii) Hydraulic jack
APPEARS IN
संबंधित प्रश्न
A piece of wood is floating in water kept in a bottle. The bottle is connected to an air pump. Neglect the compressibility of water. When more air is pushed into the bottle from the pump, the piece of wood will float with
State Pascal's law of transmission of pressure.
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
The area of cross-sections of the pump plunger and press plunger of a hydraulic press is 0.02 m2 and 8 m2 respectively. If the hydraulic press overcomes a load of 800 kgf, calculate the force acting on the pump plunger.
If the mechanical advantage of the handle of the pump plunger is 8, calculate the force applied at the end of the handle of the pump plunger.
At a given place, a barometer records 70 cm of Hg. If the mercury in the barometer is replaced by water, what would be resulting in reading? (Density of Hg = 13600 kg/m3; Density of water = 1000 kg/m3)
The pressure in the water pipe on the ground floor of a building is 40000 pascals, whereas on the first floor it’s 10000 pascals. Find the height of the first floor. (Acceleration due to gravity g = 10 ms−2)
The atmospheric pressure at a place is 650 mm of Hg. Calculate this pressure in Pascals (Pa).
The following figure shows a manometer containing a liquid of density p. The limb P of the manometer is connected to a vessel V and the limb Q is open to atmosphere. The difference in the levels of liquid in the two limbs of the manometer is h as shown in the diagram. The atmospheric pressure is P0.
(i) What is the pressure on the liquid surface in the limb Q?
(ii) What is the pressure on the liquid surface in the limb P?
Pascal’s law is used in
