Advertisements
Advertisements
प्रश्न
Give two reasons why nichrome alloy is used for making the heating elements of electrical appliances.
Advertisements
उत्तर
Nichrome is used to make the heating elements of electrical appliances because it has a high resistance and a high melting point.
APPEARS IN
संबंधित प्रश्न
Why does the cord of an electric heater not glow while the heating element does?
How does the resistance of a wire vary with its area of cross-section?
Name any two effects of electric current.
Write Joule's law of heating.
An electric iron of resistance 20 ohms draws a current of 5 amperes. Calculate the heat produced in 30 seconds.
Explain why, the current that makes the heater element very hot, only slightly warms the connecting wires leading to the heater.
A heating coil has a resistance of 200 Ω. At what rate will heat be produced in it when a current of 2.5 A flows through it?
An electric fuse works on the:
(a) chemical effect of current
(b) magnetic effect of current
(c) lighting effect of current
(d) heating effect of current
Which electric heating device in your home do you think have resistors which control the flow of electricity?
Answer the following question.
Write the mathematical expression for Joule's law of heating.
What does overloading cause?
Heating effect of current is called ______
Name any two appliances which work under the principle of heating effect of current.
A current of 1 A is drawn by a filament of an electric bulb. Number of electrons passing through a cross-section of the filament in 16 seconds would be roughly:
How does use of a fuse wire protect electrical appliances?
(a) Observe the diagram given below and state whether the bulb will glow or not when we switch on K.
(b) Is it safe to handle the bulb when the switch is OFF?
(c) Give a reason for your answer in (b).
An electric cell produces electricity from the ______ ______ in it.
A fuse is used in an electric circuit to stop high currents flowing through the circuit.
If 220 V potential difference is applied across an electric bulb, a current of 0.45 A flows in the bulb. What must be the power of the bulb?
In which of the following applications of Iron, rusting will occur most? Support your answer with valid reason.
| A | B | C | D |
 |
 |
 |
 |
