Advertisements
Advertisements
प्रश्न
Compute the bulk modulus of water from the following data: Initial volume = 100.0 litre, Pressure increase = 100.0 atm (1 atm = 1.013 × 105 Pa), Final volume = 100.5 litre. Compare the bulk modulus of water with that of air (at constant temperature). Explain in simple terms why the ratio is so large.
Advertisements
उत्तर
Initial volume, V1 = 100.0l = 100.0 × 10 –3 m3
Final volume, V2 = 100.5 l = 100.5 ×10 –3 m3
Increase in volume, ΔV = V2 – V1 = 0.5 × 10–3 m3
Increase in pressure, Δp = 100.0 atm = 100 × 1.013 × 105 Pa
Bulk modulus = `((trianglep)/(triangleV))/V_1 = (trianglep xx V_1)/(triangleV)`
`= (100 xx 1.013 xx 10^5 xx 100 xx 10^(-3))/(0.5xx 10^(-3))`
`= 2.026 xx 10^9 Pa`
Bulk modulus of air =`1.0 xx 10^5 Pa`
`:. "Bulk modulus of water"/"Bulk modulus of air" = (2.026 xx 10^9)/(1.0 xx 10^5) = 2.026 xx 10^4`
This ratio is very high because air is more compressible than water.
APPEARS IN
संबंधित प्रश्न
How much should the pressure on a litre of water be changed to compress it by 0.10%?
The Marina trench is located in the Pacific Ocean, and at one place it is nearly eleven km beneath the surface of the water. The water pressure at the bottom of the trench is about 1.1 × 108 Pa. A steel ball of initial volume 0.32 m3 is dropped into the ocean and falls to the bottom of the trench. What is the change in the volume of the ball when it reaches to the bottom?
Find the increase in pressure required to decrease the volume of a water sample by 0.01%. Bulk modulus of water = 2.1 × 109 N m−2.
Estimate the change in the density of water in ocean at a depth of 400 m below the surface. The density of water at the surface = 1030 kg m−3 and the bulk modulus of water = 2 × 109 N m−2.
A ball falling in a lake of depth 300 m shows a decrease of 0.3% in its volume at the bottom. What is the bulk modulus of the material of the ball? (g = 10 m/s2)
For an ideal liquid ______.
- the bulk modulus is infinite.
- the bulk modulus is zero.
- the shear modulus is infinite.
- the shear modulus is zero.
For an ideal liquid ______.
- the bulk modulus is infinite.
- the bulk modulus is zero.
- the shear modulus is infinite.
- the shear modulus is zero.
To what depth must a rubber ball be taken in deep sea so that its volume is decreased by 0.1%. (The bulk modulus of rubber is 9.8 × 108 Nm–2; and the density of sea water is 103 kg m–3.)
A solid sphere of radius r made of a soft material of bulk modulus K is surrounded by a liquid in a cylindrical container. A massless piston of the area floats on the surface of the liquid, covering the entire cross-section of the cylindrical container. When a mass m is placed on the surface of the piston to compress the liquid, the fractional decrement in the radius of the sphere `((dr)/r)`, is ______.
Bulk modulus applies to ______.
Volume strain is calculated as ______.
Compressibility is ______ of the bulk modulus.
Which of the following materials has the highest resistance to compression?
Bulk modulus is defined as the ratio of ______ to ______.
