मराठी

Calculate the Magnitude of the Force of a Couple, When the Arm of the Couple is 63 Cm and the Moment of the Couple is 21 Nm. - Physics

Advertisements
Advertisements

प्रश्न

Calculate the magnitude of the force of a couple, when the arm of the couple is 63 cm and the moment of the couple is 21 Nm.

संख्यात्मक
Advertisements

उत्तर

Moment of couple = F × Arm of couple

21 Nm = F × 63 cm

21 Nm = F × 0.63 m

F =`21/0.63` = 33.33 N.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 1: Force, Work, Power and Energy - Short Numerical

APPEARS IN

आईसीएसई Physics [English] Class 10
पाठ 1 Force, Work, Power and Energy
Short Numerical | Q 6

संबंधित प्रश्‍न

How does the effect of force differ when it is applied on a non-rigid body?


State one way to decrease the moment of a given force about a given axis of rotation.


Sleepers are used below the rails.


A rocket is moving at a constant speed in space by burning its fuel and ejecting out the burnt gases through a nozzle. Answer the following

1) Is there any change in the momentum of the rocket? if yes, what causes the change in momentum?

2) Is there any force acting on the rocket? if yes, how much?


A, B and C are the three forces each of magnitude 4 N acting in the plane of the paper as shown in Figure. The point O lies in the same plane.

  1. Which force has the least moment about O? Give a reason.
  2. Which force has the greatest moment about O? Give a reason.
  3. Name the forces producing
    (a) Clockwise
    (b) anticlockwise moments.
  4. What is the resultant torque about the point O?

Two forces each of magnitude 10 N act vertically upwards and downwards respectively at the two ends A and B of a uniform rod of length 4 m which is pivoted at its midpoint O as shown in the figure. Determine the magnitude of the resultant moment of forces about the pivot O.


The figure shows two forces each of magnitude 10 N acting at the point A and B at a separation of 50 cm, in opposite directions. Calculate the resultant moment of two forces about the point.

  1. A,
  2. B and
  3. O situated exactly at the middle of the two forces.


Give an example for each of the following uses of a machine:

to change the point of application of force


Fig.  shows a uniform meter scale weighing 100 N pivoted at its centre. Two weights of 500 N and 300 N are hung from the ruler as shown in fig.

(i)    Calculate total clockwise and anticlockwise moments.
(ii)    Calculate difference in clockwise moment and anticlockwise moment.
(iii)    Calculate the distance from O where a 100 N weight should be suspended to balance the meter scale.


The S.I. unit of moment of force is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×