Advertisements
Advertisements
प्रश्न
Answer the following question.
What is the function of a galvanometer in a circuit?
Advertisements
उत्तर
The function of the galvanometer in the circuit is to detect or measure the small amount of current flowing in the circuit.
APPEARS IN
संबंधित प्रश्न
Compare how an ammeter and a voltmeter are connected in a circuit.
The figure given below shows an electric circuit in which current flows from a 6 V battery through two resistors.
- Are the resistors connected in series with each other or in parallel?
- For each resistors, state the p.d. across it.
- The current flowing from the battery is shared between the two resistors. Which resistor will have bigger share of the current?
- Calculate the effective resistance of the two resistors.
- Calculate the current that flows from the battery.
Two lamps, one rated 40 W at 220 V and the other 60 W at 220 V, are connected in parallel to the electric supply at 220 V.
(a) Draw a circuit diagram to show the connections.
(b) Calculate the current drawn from the electric supply.
(c) Calculate the total energy consumed by the two lamps together when they operate for one hour.
Match the pairs.
| ‘A’ Group | ‘B’ Group |
| 1. Free electrons | a. V/R |
| 2. Current | b. Increases the resistance in the circuit |
| 3. Resistivity | c. Weakly attached |
| 4. Resistances in series | d. VA/LI |
Tick(✓) the correct choice in the following:
A three pin plug is connected to the lead for a 1 kW electric iron to be
used on a 250 V supply. Which of the following statements is not correct?
What is the criteria for selecting a fuse wire?
If the potential differences between two parts of a thundercloud is 10s V,
what is the amount of energy given up during the passage of 20 coulombs?
(a)2x10-7J
(b)200J
(c)Sx106 j
(d)2x 109J
(e)2x 1010 J
Which of the following represents voltage?
For current to flow, one needs art open circuit.
What is the rate at which charges flow past a point on a circuit?
