Advertisements
Advertisements
प्रश्न
A tuning fork A, marked 512 Hz, produces 5 beats per second, where sounded with another unmarked tuning fork B. If B is loaded with wax the number of beats is again 5 per second. What is the frequency of the tuning fork B when not loaded?
Advertisements
उत्तर
Given that, vA = 512
On loading, frequencies of B decreased
So, in the first case v1 = 5
⇒ vB = vA ± 5
When B is loaded, the frequency of B becomes,
⇒ vB = 512 ± 5
We can write it as,
⇒ vB = 507 or vB = 517
On load in the frequency of B decreased by 507 to lower value of the number of beats will increase so vB ≠ 507
If vB = 517 then its frequency decreases by 10 Hz by then the number of beats will also be the same as 512 – 507 = 5.
Thus, the frequency of the tuning fork B when not loaded is 517 Hz.
APPEARS IN
संबंधित प्रश्न
Doppler effect is not applicable when _______.
(A) source and observer are at rest.
(B) there is a relative motion between source and observer.
(C) both are moving in opposite directions.
(D) both are moving in same direction with different velocities
State any four applications of Doppler effect
A set of 8 tuning forks is arranged in a series of increasing order of frequencies. Each fork gives 4 beats per second with the next one and the frequency of last fork is twice that of the first. Calculate the frequencies of the first and the last fork.
What are beats?
If two tuning forks A and B are sounded together, they produce 4 beats per second. When A is slightly loaded with wax, they produce 2 beats when sounded again. The frequency of A is 256 Hz. The frequency of B will be ______
Two waves of wavelength 2 m and 2.02 m, with the same speed superimpose to produce 2 beats per second. The speed of each wave is ____________.
A set of 56 tuning forks are arranged in series of increasing frequencies. If each fork gives 4 beats with preceding one and the frequency of the last is twice than than that of first, then frequency of the first fork is ____________.
A pipe closed at one end has a length of 1m and at its open end, 0.25 m long uniform string is vibrating in its third harmonic and resonates with a fundamental frequency of pipe. If the tension in the string is 100 N and the speed of sound is 340 `m/s`, then the mass of the string is near ______
Two identical wires are vibrating in unison. If the tension in one of the wires is increased by 2%, five beats are produced per second by the two vibrating wires. The initial frequency of each wire is ______
`(sqrt(1 . 0.2) ≑ 1 . 0.1)`
Two wires are producing fundamental notes of the same frequency. Change in which of the following factors of one wire will NOT produce beats between them?
Prove that the frequency of beats is equal to the difference between the frequencies of the two sound notes giving rise to beats.
The velocity of sound in a gas in which two wavelengths 4.08 m and 4.16 m produce 40 beats in 12 s, will be ______.
Wire having tension 225 N produces six beats per second when it is tuned with a fork. When tension changes to 256 N, it is tuned with the same fork, the number of beats remain unchanged. The frequency of the fork will be ______.
Two tuning forks of frequencies 320 Hz and 340 Hz are sounded together to produce a sound wave. The velocity of sound in air is 326.4 m/s. Calculate the difference in wavelengths of these waves.
A sonometer wire under a tension of 40 N vibrates in unison with a tuning fork of frequency 384 Hz. Find the beat frequency when the tension in the wire is reduced by 0.21 N.
A tuning fork and a vibrating sonometer wire give 6 beats per second, either with a length of the wire of 1.0 m or 1.06 m. The frequency of the fork is
