मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

A Parallel-plate Capacitor of Plate-area a and Plate Separation D is Joined to a Battery of Emf ε and Internal Resistance R at T = 0. Consider a Plane Surface of Area A/2,

Advertisements
Advertisements

प्रश्न

A parallel-plate capacitor of plate-area A and plate separation d is joined to a battery of emf ε and internal resistance R at t = 0. Consider a plane surface of area A/2, parallel to the plates and situated symmetrically between them. Find the displacement current through this surface as a function of time.

बेरीज
Advertisements

उत्तर

Electric field strength for a parallel plate capacitor,

`E = Q/(∈_0A)`

Electric flux linked with the area,

`phi_E = EA = Q/(∈_0A) xx A/2 = Q/(2∈_0)`

Displacement current , 

`I_d = ∈_0 (dphi_E)/dt = ∈_0 d/dt(Q/(∈_0 2))`

`I_d = 1/2((dQ)/dt)`     ....(i)

Charge on the capacitor as a function of time during charging,

`Q = εC[1 - e^(-t"/"RC)]`:

Putting this in equation (i), we get :

`I_d = 1/2 εC d/dt(1 - e^(-t"/"RC))`

`I_d = 1/2 εC(-e^(-t"/"RC)) xx (-1/(RC))`

`C = (A∈_0)/d`

⇒ `I_d = ε/(2R) xx e^(-(td)/(ε_0AR))`

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 40: Electromagnetic Waves - Exercises [पृष्ठ ३९९]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
पाठ 40 Electromagnetic Waves
Exercises | Q 3 | पृष्ठ ३९९

संबंधित प्रश्‍न

Figure shows a capacitor made of two circular plates each of radius 12 cm, and separated by 5.0 cm. The capacitor is being charged by an external source (not shown in the figure). The charging current is constant and equal to 0.15 A.

  1. Calculate the capacitance and the rate of charge of the potential difference between the plates.
  2. Obtain the displacement current across the plates.
  3. Is Kirchhoff’s first rule (junction rule) valid at each plate of the capacitor? Explain.


Without the concept of displacement current it is not possible to correctly apply Ampere’s law on a path parallel to the plates of parallel plate capacitor having capacitance C in ______.


A cylinder of radius R, length Land density p floats upright in a fluid of density p0. The cylinder is given a gentle downward push as a result of which there is a vertical displacement of size x; it is then released; the time period of resulting (undampe (D) oscillations is ______.


Displacement current goes through the gap between the plantes of a capacitors. When the charge of the capacitor:-


Which of the following is the unit of displacement current?


A parallel plate capacitor of plate separation 2 mm is connected in an electric circuit having source voltage 400 V. What is the value of the displacement current for 10-6 second if the plate area is 60 cm2?


According to Maxwell's hypothesis, a changing electric field gives rise to ______.


A capacitor of capacitance ‘C’, is connected across an ac source of voltage V, given by V = V0 sinωt The displacement current between the plates of the capacitor would then be given by ______


You are given a 2 µF parallel plate capacitor. How would you establish an instantaneous displacement current of 1 mA in the space between its plates?


Sea water at frequency ν = 4 × 108 Hz has permittivity ε ≈ 80 εo, permeability µ ≈ µo and resistivity ρ = 0.25 Ω–m. Imagine a parallel plate capacitor immersed in seawater and driven by an alternating voltage source V(t) = Vo sin (2πνt). What fraction of the conduction current density is the displacement current density?


A long straight cable of length `l` is placed symmetrically along z-axis and has radius a(<< l). The cable consists of a thin wire and a co-axial conducting tube. An alternating current I(t) = I0 sin (2πνt) flows down the central thin wire and returns along the co-axial conducting tube. The induced electric field at a distance s from the wire inside the cable is E(s,t) = µ0I0ν cos (2πνt) In `(s/a)hatk`.

  1. Calculate the displacement current density inside the cable.
  2. Integrate the displacement current density across the cross-section of the cable to find the total displacement current Id.
  3. Compare the conduction current I0 with the displacement current `I_0^d`.

A particle is moving with speed v = b`sqrtx` along positive x-axis. Calculate the speed of the particle at time t = τ (assume that the particle is at origin at t = 0).


A parallel plate capacitor is charged to 100 × 10-6 C. Due to radiations, falling from a radiating source, the plate loses charge at the rate of 2 × 10-7 Cs-1. The magnitude of displacement current is ______.


Draw a neat labelled diagram of displacement current in the space between the plates of the capacitor.


A parallel plate capacitor made of circular plates is being charged such that the surface charge density on its palates is increasing at a constant rate with time. The magnetic field arising due to displacement current is ______.


Where does conduction current flow as the capacitor charges?


What magnetic effect did Maxwell propose for a time-varying electric field?


How does displacement current apply when charging a smartphone?


How is displacement current relevant to MRI machines?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×