मराठी

A gas X at 1 atm is bubbled through a solution containing a mixture of 1 MY− and 1 MZ− at 25°C. If the reduction potential of Z > Y > X, then ______. - Chemistry (Theory)

Advertisements
Advertisements

प्रश्न

A gas X at 1 atm is bubbled through a solution containing a mixture of 1 MY and 1 MZ at 25°C. If the reduction potential of Z > Y > X, then ______.

पर्याय

  • Y will oxidise X and not Z

  • Y will oxidise Z and not X

  • Y will oxidise both X and Z

  • Y will reduce both X and Z

MCQ
रिकाम्या जागा भरा
Advertisements

उत्तर

A gas X at 1 atm is bubbled through a solution containing a mixture of 1 MY and 1 MZ at 25°C. If the reduction potential of Z > Y > X, then Y will oxidise X and not Z.

Explanation:

A species can oxidise another if it has a higher reduction potential.

\[\ce{E^{\circ}_{Z} > E^{\circ}_{Y} > E^{\circ}_{X}}\]

So, Y can oxidise X (since Y has a higher reduction potential than X), but cannot oxidise Z, because Z has an even higher reduction potential than Y. Hence, Y will oxidise X and not Z.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 9: Electro Chemistry - Evaluation [पृष्ठ ६५]

APPEARS IN

सामाचीर कलवी Chemistry - Volume 1 and 2 [English] Class 12 TN Board
पाठ 9 Electro Chemistry
Evaluation | Q 24. | पृष्ठ ६५
नूतन Chemistry Part 1 and 2 [English] Class 12 ISC
पाठ 3 Electrochemistry
OBJECTIVE (MULTIPLE CHOICE) TYPE QUESTIONS | Q 28. | पृष्ठ १९९

संबंधित प्रश्‍न

If 'I' stands for the distance between the electrodes and 'a' stands for the area of cross-section of the electrode, `"l"/"a"` refers to ____________.


What is the SI unit tor electrochemical equivalent?


Assertion: pure iron when heated in dry air is converted with a layer of rust.

Reason: Rust has the compositionFe3O4.


A certain current liberated 0.504 gm of hydrogen in 2 hours. How many grams of copper can be liberated by the same current flowing for the same time through copper sulphate solution.


Why is anode in galvanic cell considered to be negative and cathode positive electrode?


An electrochemical cell can behave like an electrolytic cell when ______.


Use the data given in below find out the most stable oxidised species.

`E^0 (Cr_2O_1^(2-))/(Cr_(3+))` = 1.33 V   `E^0 (Cl_2)/(Cl^-)` = 1.36 V

`E^0 (MnO_4^-)/(MN^(2+))` = 1.51 V   `E^0 (Cr^(3+))/(Cr)` = – 0.74 V


`E_(cell)^Θ` for some half cell reactions are given below. On the basis of these mark the correct answer.

(a) \[\ce{H^{+} (aq) + e^{-} -> 1/2 H_2 (g); E^Θ_{cell} = 0.00V}\]

(b) \[\ce{2H2O (1) -> O2 (g) + 4H^{+} (aq) + 4e^{-}; E^Θ_{cell} = 1.23V}\]

(c) \[\ce{2SO^{2-}_{4} (aq) -> S2O^{2-}_{8} (aq) + 2e^{-}; E^Θ_{cell} = 1.96V}\]

(i) In dilute sulphuric acid solution, hydrogen will be reduced at cathode.

(ii) In concentrated sulphuric acid solution, water will be oxidised at anode.

(iii) In dilute sulphuric acid solution, water will be oxidised at anode.

(iv) In dilute sulphuric acid solution, \[\ce{SO4^{2-}}\] ion will be oxidised to tetrathionate ion at anode.


Read the passage given below and answer the questions that follow:

Oxidation-reduction reactions are commonly known as redox reactions. They involve transfer of electrons from one species to another. In a spontaneous reaction, energy is released which can be used to do useful work. The reaction is split into two half-reactions. Two different containers are used and a wire is used to drive the electrons from one side to the other and a Voltaic/Galvanic cell is created. It is an electrochemical cell that uses spontaneous redox reactions to generate electricity. A salt bridge also connects to the half-cells. The reading of the voltmeter gives the cell voltage or cell potential or electromotive force. If \[\ce{E^0_{cell}}\] is positive the reaction is spontaneous and if it is negative the reaction is non-spontaneous and is referred to as electrolytic cell. Electrolysis refers to the decomposition of a substance by an electric current. One mole of electric charge when passed through a cell will discharge half a mole of a divalent metal ion such as Cu2+. This was first formulated by Faraday in the form of laws of electrolysis.
The conductance of material is the property of materials due to which a material allows the flow of ions through itself and thus conducts electricity. Conductivity is represented by k and it depends upon nature and concentration of electrolyte, temperature, etc. A more common term molar conductivity of a solution at a given concentration is conductance of the volume of solution containing one mole of electrolyte kept between two electrodes with the unit area of cross-section and distance of unit length. Limiting molar conductivity of weak electrolytes cannot be obtained graphically.

  1. Is silver plate the anode or cathode?  (1)
  2. What will happen if the salt bridge is removed?  (1)
  3. When does electrochemical cell behaves like an electrolytic cell?  (1)
  4. (i) What will happen to the concentration of Zn2+ and Ag+ when Ecell = 0.   (1)
    (ii) Why does conductivity of a solution decreases with dilution?  (1)
    OR
    The molar conductivity of a 1.5 M solution of an electrolyte is found to be 138.9 S cm2mol-1. Calculate the conductivity of this solution.  (2)

Which of the following is incorrect?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×