Advertisements
Advertisements
प्रश्न
A bimetallic strip is made of aluminium and steel (αAl > αsteel) . On heating, the strip will ______.
पर्याय
remain straight.
get twisted.
will bend with aluminium on concave side.
will bend with steel on concave side.
Advertisements
उत्तर
A bimetallic strip is made of aluminium and steel (αAl > αsteel) . On heating, the strip will bend with steel on concave side.
Explanation:
As αAl > αsteel, aluminium will expand more. So, it should have a larger radius of curvature. Hence, aluminium will be on the convex side.
APPEARS IN
संबंधित प्रश्न
If two bodies are in thermal equilibrium in one frame, will they be in thermal equilibrium in all frames?
If an automobile engine is overheated, it is cooled by pouring water on it. It is advised that the water should be poured slowly with the engine running. Explain the reason.
A system X is neither in thermal equilibrium with Y nor with Z. The systems Y and Z
For a constant-volume gas thermometer, one should fill the gas at
Show that the moment of inertia of a solid body of any shape changes with temperature as I = I0 (1 + 2αθ), where I0 is the moment of inertia at 0°C and α is the coefficient of linear expansion of the solid.
Answer the following question.
Give an example of the disadvantages of thermal stress in practical use?
A metre scale made of a metal reads accurately at 25 °C. Suppose in an experiment an accuracy of 0.12 mm in 1 m is required, the range of temperature in which the experiment can be performed with this metre scale is ______.(coefficient of linear expansion of the metal is `20 xx 10^-6 / (°"C")`
A metal rod of Young's moduls 'Y' and coefficient of linear expansion 'a' has its temeprature raised by 'Δ θ'. The linear stress to prevent the expansion of rod is ______.
(L and l is original length of rod and expansion respectively)
The volume of a metal block changes by 0.86% when heated through 200 °C then its coefficient of cubical expansion is ______.
A uniform metallic rod rotates about its perpendicular bisector with constant angular speed. If it is heated uniformly to raise its temperature slightly ______.
An aluminium sphere is dipped into water. Which of the following is true?
If the temperature of the sun were to increase from T to 2T and its radius from R to 2R, then the ratio of the radiant energy received on earth to what it was previously will be ______.
A clock with an iron pendulum keeps the correct time at 15°C. If the room temperature is 20°C, the error in seconds per day will be near ______.
(coefficient of linear expansion of iron is 1.2 × 10-5/°C)
When heat is given to a substance, it generally ______.
The increase in the dimensions of a body due to an increase in its temperature is called ______.
When a solid is heated, its atoms vibrate faster and move farther apart. This happens because ______.
A metallic bar of Young’s modulus, 0.5 × 1011 N m−2 and coefficient of linear thermal expansion 10−5°C−1, length 1 m and area of cross-section 10−3 m2 is heated from 0°C to 100°C without expansion of bending. The compressive force developed in it is ______.
