मराठी
तामिळनाडू बोर्ड ऑफ सेकेंडरी एज्युकेशनतामिळनाडू प्राथमिक शाळा इयत्ता ४

_______ is a machine made up of wheel and rope.

Advertisements
Advertisements

प्रश्न

_______ is a machine made up of wheel and rope.

पर्याय

  • Ramp

  • Simple machines

  • Work

  • Energy

  • Pulley

MCQ
रिकाम्या जागा भरा
Advertisements

उत्तर

Pulley is a machine made up of wheel and rope.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 3: Work and Energy - Evaluation [पृष्ठ १११]

APPEARS IN

सामाचीर कलवी Science - Term 1 [English] Class 4 TN Board
पाठ 3 Work and Energy
Evaluation | Q I. 3. | पृष्ठ १११

संबंधित प्रश्‍न

The mechanical advantage of an actual pulley is less than one. Give a reason. What is the justification for using the pulley then?


Define the following term in reference to a gear system for Driven gear ?


Name the type of single pulley that can act as a force multiplier. Draw a labelled diagram of the pulley mentioned by you.


What is a block and tackle system of pulleys?


Write two uses of pulleys. Is pulley a force multiplier?


In the case of a block and tackle arrangement, the mechanical advantage increases with the number of pulleys. Explain.


In the alongside the figure of two pulleys shown a system in which one pulley is fixed and the other is movable. What is the velocity ratio of the system?
An effort of 600 N is needed to lift a weight of 1000 N. What are the mechanical advantage and efficiency of the pulley system?


Diagram given below shows an arrangement of four pulleys. A load L is attached to the movable lower block and effort E is applied at the free end of the string.
Copy the diagram; and

(i) Draw arrows to indicate tension in each part of the string; and
(ii) Calculate the mechanical advantage of the system.


A pulley system has a velocity ratio of 4 and an efficiency of 90%. Calculate:
(i) the mechanical advantage of the system.
(ii) the effort required to raise a load of 300 N by the system.


A block and tackle system of pulleys has a velocity ratio of 4.

  1. Draw a labelled diagram of the system indicating clearly the direction of the load and effort.
  2.  Calculate the potential energy of the load 100 kgf lifted by this pulley to a height 5 m. (g = 10 ms−2)

Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×