Advertisements
Advertisements
प्रश्न
Write about the experiment to find the centre of gravity of the irregularly shaped plate.
Advertisements
उत्तर
1. Make three holes in the lamina
2. Suspend the lamina from the optical pin through one of the holes
3. Suspend the plumb line from the pin and mark the position of the plumb line on the lamina’
4. Draw lines on the lamina representing the positions of the plumb line.
5. Repeat the above steps for the holes.
6. Label the intersection of the three lines as X, the position of the center of gravity of the lamina.
APPEARS IN
संबंधित प्रश्न
A uniform half meter rule balances horizontally on a knife-edge at 29 cm mark when a weight of 20 gf is suspended from one end
1) Draw a diagram of the arrangement
2) What is the weight of the half meter rule?
At which point is the centre of gravity situated in a circular lamina?
The centre of gravity of a uniform ball is ______.
Following Fig shows piece of cardboard of uniform thickness cut into different shapes. Draw two lines to indicate the position of centre of gravity G.
The centre of gravity of a hollow cone of height h is at distance x from its vertex where the value of x is ______.
Can the CG be situated outside the material of the body? Give an example.
If mean radius of earth is R, its angular velocity is ro and the acceleration due to gravity at the surface of the earth is g, then the cube of the radius of the orbit of satellite will be ____________.
When this triangular lamina is suspended freely from any one vertex, what is the moment of force produced by its own weight in its rest position?
When balancing a ruler on your finger, the point of balance is the ruler's ______.
