Advertisements
Advertisements
प्रश्न
Why two holes are made to empty an oil tin?
Advertisements
उत्तर
When oil comes out through a tin with one hole, the pressure inside the tin becomes less than the atmospheric pressure, soon the oil stops flowing out. When two holes are made in the tin, the air keeps on entering the tin through the other hole and maintains pressure inside.
APPEARS IN
संबंधित प्रश्न
The viscous force acting between two layers of a liquid is given by \[\frac{F}{A} = - \eta\frac{dv}{dz}\]. This F/A may be called
A raindrop falls near the surface of the earth with almost uniform velocity because
Estimate the speed of vertically falling raindrops from the following data. Radius of the drops = 0.02 cm, viscosity of air = 1.8 × 10−4 poise, g= 9.9 × 10 ms−2 and density of water = 1000 kg m−3.
What is Reynold’s number? Give its significance.
From amongst the following curves, which one shows the variation of the velocity v with time t for a small-sized spherical body falling vertically in a long column of a viscous liquid.
In motors, more viscous oil is used in summer than in winter due to ____________.
A solid ball of density ρ1 and radius r falls vertically through a liquid of density ρ2. Assume that the viscous force acting on the ball is F = krv, where k is a constant and v its velocity. What is the terminal velocity of the ball?
The coefficient of apparent expansion of mercury in a glass vessel is 153 × 10-6/°C and in a steel vessel is 144 × 10-6/°C. If α for steel is 12 × 10-6/°C, then that of glass is ______.
State and explain Newton's law of viscosity.
A force of 0.01 N is required to move a flat glass plate of area of 10 cm2 with a uniform velocity of 1 cm/ s over the surface of a liquid 2 mm thick. If the coefficient of viscosity of the liquid is 20 poise, the velocity gradient in the liquid layer is ______.
