Advertisements
Advertisements
प्रश्न
Which of the following is likely to be the correct wattage for an electric iron used in our homes?
(a) 60 W
(b) 250 W
(c) 850 W
(d) 2000 W
Advertisements
उत्तर
(c) 850 W
An electric iron may use a power of 850 watts.
APPEARS IN
संबंधित प्रश्न
State two factors on which the electrical energy consumed by an electrical appliance depends.
An electric lamp is labelled 12 V, 36 W. This indicates that it should be used with a 1 V supply. What other information does the label provide?
Define kilowatt-hour.
In a filament type light bulb, most of the electric power consumed appears as:
(a) visible light
(b) infra-red-rays
(c) ultraviolet rays
(d) fluorescent light
Calculate the current through a 60 W lamp rated for 250 V. If the line voltage falls to 200 V, how is the power consumed by the bulb affected?
An electric bulb is rated ‘100 W, 250 V’. How much current will the bulb draw if connected to a 250 V supply?
An electric bulb is rated 250 W, 230 V. Calculate:
- the energy consumed in one hour
- the time in which the bulb will consume 1.0 kWh energy when connected to 230 V mains.
An electric toaster draws 8 A current in a 220 V circuit. It is used for 2 h. Find the cost of
operating the toaster if the cost of electrical energy is Rs. 4.50 per kWh.
Water in an electric kettle connected to a 220 V supply took 5 minutes to reach its boiling point. How long will it take if the supply voltage falls to 200 V?
Which cable, one rated 15A and the other rated 5A will be thicker? Give a reason.
Why is heating coil wound in the form of a helix in electric stove?
An electric filament lamp is connected to a supply of voltage higher than the recommended value. Give reasons, why compared with a normal performance, the lamp emits a brighter light and its life is shortened.
Why does not the heating coil produce any visible light? in an electric stove.
State (i) the S. I. unit, (ii) the household unit, of electrical energy. How are these units related?
Compare the power used in the 2 Ω resistor in each of the following circuits:
- a 6 V battery in series with 1 Ω and 2 Ω resistors
- a 4 V battery in parallel with 12 Ω and 2 Ω resistors.
A student wants to use an electric heater, an electric bulb and an electric fan simultaneously.
How should these gadgets be connected with the mains? Justify your answer giving three reasons.
