Advertisements
Advertisements
प्रश्न
What is the SI unit of (i) electric energy, and (ii) electric power?
Advertisements
उत्तर
(i) The SI unit of electric energy is joule.
(ii) The SI unit of electric power is watt.
APPEARS IN
संबंधित प्रश्न
Which uses more energy, a 250 W TV set in 1 hr, or a 1200 W toaster in 10 minutes?
How much energy does a 100 W electric bulb transfer in 1 minute?
(a) 100 J
(b) 600 J
(c) 3600 J
(d) 6000 J
Which of the following is the most likely temperature of the filament of an electric light bulb when it is working on the normal 220 V supply line?
(a) 500°C
(b) 1500°C
(c) 2500°C
(d) 4500°C
List the names of three electrical gadgets used in your house. Write their power, voltage ratingand approximate time for which each one is used in a day. Hence find the electrical energyconsumed by each in a day.
Calculate the current through a 60 W lamp rated for 250 V. If the line voltage falls to 200 V, how is the power consumed by the bulb affected?
A current of 0.2 A flows through a wire whose ends are at a potential difference of 15 V.
calculate:
(i) the resistance of the wire and
(ii) the heat energy produced in 1 minute.
Two bulbs are rated 60 W, 220 V and 60 W, 110 V respectively. Calculate the ratio of their
resistances
Tick(✓) the correct choice in the following:
In the circuit shown in the following fig, the e.m.f. of the cell is 4 volts, the current
flowing through the resistor is
Water in an electric kettle connected to a 220 V supply took 5 minutes to reach its boiling point. How long will it take if the supply voltage falls to 200 V?
Household wiring for lamp connections can either be done in parallel or in series.Which one would you prefer? Give a reason for your answer.
Why is the electric power from the generating station transmitted at high voltage?
How does the heat produced by die passage of current in a metallic wire depend on the time of passage of current in the wire?
An electric heater is rated 220 V, 550 W. Calculate the electrical energy consumed in 3 hours?
You are required to connect a bulb, a fan and a socket outlet to the mains in one set A and an air-conditioner and a refrigerator to the mains in other set B. Will you recommend the wire of same thickness and same insulation in both? explain your answer.
Establish the relation that heat produced in a metallic conductor due to the flow of current is V2t/R joules, where V is the potential difference across the ends of the conductor, R its resistance and t is the time in second for which current flows.
The equation I2R seems to suggest that the rate of heating in a resistor is reduced if resistance decreases, whereas equation P = V2/R suggests just the opposite. How do you reconcile this problem?
1 mV is equal to:
What is the commercial unit of electrical energy? Represent it in terms of joules.
A student wants to use an electric heater, an electric bulb and an electric fan simultaneously.
How should these gadgets be connected with the mains? Justify your answer giving three reasons.
