Advertisements
Advertisements
प्रश्न
Two LED bulbs of 12W and 6W are connected in series. If the current through 12W bulb is 0.06A the current through 6W bulb will be ______.
विकल्प
0.04 A
0.06 A
0.08 A
0.12 A
Advertisements
उत्तर
Two LED bulbs of 12W and 6W are connected in series. If the current through 12W bulb is 0.06A the current through 6W bulb will be 0.06 A.
Explanation:
Both bulbs receive the same current because they are connected in series. They will have different voltages.
APPEARS IN
संबंधित प्रश्न
Draw a diagram showing the directions of three magnetic field lines due to a straight wire carrying current. Also show the direction of current in the wire.
How is the magnetic field due to a straight current carrying wire affected if current in wire is decreased?
How is the magnetic field due to a straight current carrying wire affected if current in wire is reversed?
Describe a set up for plotting the magnetic lines of force in: (i) A straight wire, (ii) A circular coil and (iii) A straight solenoid.
Which of the following statement is not correct about the magnetic field?
Magnetic lines of force inside current carrying solenoid are ____________.
A magnetic compass needle is placed in the plane of paper near point A as shown in Figure. In which plane should a straight current carrying conductor be placed so that it passes through A and there is no change in the deflection of the compass? Under what condition is the deflection maximum and why?
AB is a current carrying conductor in the plane of the paper as shown in Figure. What are the directions of magnetic fields produced by it at points P and Q? Given r1 > r2, where will the strength of the magnetic field be larger?
When is the force experienced by a current-carrying straight conductor placed in a uniform magnetic field.
- Maximum
- Minimum
- Assertion: A compass needle is placed near a current-carrying wire. The deflection of the compass needle decreases when the magnitude of the current in the wire is increased.
- Reason: The strength of a magnetic field at a point near the conductor increases by increasing the current.
